Abstract:Phase change material (PCM) has recently been regarded as a promising thermal management means for lithium-ion (Li-ion) batteries. However, solid-liquid phase change of many current PCMs occurs in a narrow temperature range, and the cooling performance of their liquid phase is rather poor. To tackle these issues, this article presents a battery thermal management (BTM) design which injects PCM into an aluminum shell around each cell, and machines the shell inner surfaces into a row of straight rectangular fins immersed into the PCM and its outer surfaces into a plain-fin shape exposed in the air. In the mild thermal conditions, the finned shells of two adjacent cells can be embedded and passive PCM cooling is employed. Once the PCM completely melts, the shells will move apart and an airflow will be driven through the gap between them. The BTM design can also protect Li-ion batteries in a freezing environment, by taking advantage of PCM solidification when the finned shells return to their embedded configuration. A series of experiments were conducted to examine its effectiveness on two 50Ah lithium nickel cobalt manganese oxide (NCM) prismatic batteries, which were discharged at a capacity-rate of 2C and at room temperatures of T0=25∘C , 40∘C and −10∘C . It is shown that in the battery discharge at T0=25∘C , PCM in the embedded finned shells effectively reduced the average battery-surface temperature ( T ̄ ) and the maximum temperature difference ( ΔTmax ) by 21% and 36.7% , respectively, compared to bare batteries. At T0=40∘C , this BTM design successfully limited the growth of T ̄ to 9.0∘C and led to ΔTmax no more than 1.5∘C . As to the low-temperature scenario, it maintained the batteries at temperatures above T0 for 55.2% longer than those without any BTM protections. Its cooling performance was also compared with that of the conventional liquid-cooling scheme using a bottom serpentine-channel cooling plate. All these results clearly demonstrate that the BTM design in this article can compensate for the deficiencies of conventional PCM-based BTM schemes. Regardless of whether the PCM phase change is available, it has well coped with different thermal management demands of Li-ion batteries.

Heat generation measurement and thermal management with phase change material based on heat flux for high specific energy power battery

Bidirectionally High Thermal Conductive Phase Change Materials with Arrayed Radially Oriented Boron Nitride Nanosheets for Battery Pack Thermal Management

A Novel Heat Generation Acquisition Method of Cylindrical Battery Based on Core and Surface Temperature Measurements

Measurement of Thermophysical Parameters and Thermal Modeling of 21,700 Cylindrical Battery

Study on thermal aspects of lithium-ion battery packs with phase change material and air cooling system

Optimization of heat transfer and temperature control of battery thermal management system based on composite phase change materials

Experimental investigation on thermally induced aluminum nitride based flexible composite phase change material for battery thermal management

Investigation on the Thermal Behavior of Ni-rich NMC Lithium Ion Battery for Energy Storage

Paraffin/graphite/boron nitride composite as a novel phase change material for rapid heat absorption in battery thermal management technology

Experimental and Numerical Investigations of a Thermal Management System Using Phase-Change Materials and Forced-Air Cooling for High-Power Li-Ion Battery Packs

Experimental investigations of a novel phase change material and nano enhanced phase change material based passive battery thermal management system for Li-ion battery discharged at a high C rate

Thermal analysis of high specific energy NCM-21700 Li-ion battery cell under hybrid battery thermal management system for EV applications

A thermal management design using phase change material in embedded finned shells for lithium-ion batteries

Experimental investigation of the thermal performance of heat pipe assisted phase change material for battery thermal management system

Simulation and analysis of heat dissipation performance of power battery based on phase change material enhanced heat transfer variable fin structure

Experimental Investigation on the Heat Dissipation Effect of Power Battery Pack Cooled with Phase Change Materials

An innovative battery thermal management with thermally induced flexible phase change material

Thermal Characteristics of Li‐ion Battery based on Phase Change Material‐Aluminum Plate‐Fin Composite Heat Dissipation

Study of Natural Convection of Lithium-Ion Battery Module Employing Phase Change Material

Thermal management of Lithium-ion battery pack through the application of flexible form-stable composite phase change materials

Thermal performance of nano-enhanced phase change material and air-based lithium-ion battery thermal management system: An experimental investigation