Abstract:Synthetic fibres form an important part of the textile industry, the production of poly(ethylene terephthalate) (PET) alone surpassing that of cotton. A disadvantage of synthetic fibres is their low hydrophilicity. Polyester fibres are particularly hydrophobic. This affects the processability and functionalisation of the fibres. A novel and promising alternative is the use of enzymes in surface modification of synthetic fibres. Synthetic materials have generally been considered resistant to biological degradation; recent developments at different research groups demonstrate that enzymes are very well capable of hydrolysing synthetic materials. Cutinase has been reported to increase hydrophilicity of polyesters by hydrolysis of ester bonds. Hydrolysis of PET by cutinase is via an endo-mechanism, resulting in new carboxyl and hydroxyl groups in the polymer surface. NaOH hydrolysis is via hydrolysis of end groups which results in little or no increase of new carboxyl and hydroxyl groups in the polymer surface. The enzymatic process therefore facilitates functionalisation processes. Enzymes will not penetrate into the material, and therefore not affect the favourable bulk properties contrary to chemical treatments. Manipulation of surface characteristics of textile materials is of fundamental importance in the production of advanced functional textiles. While a lot of research focuses on chemical modification or structuring of the surfaces, the introduction of functionalities using enzymes is a relatively unexplored and modern scientific area. The advantage of biotechnology or more specifically enzymes over other technologies is their high specificity towards a certain reaction or substrate. The general aim of our research is to functionalise (bio)polymeric textile materials using modern biotechnology. Enzymatic surface modification of textile materials involves processing of fibres or (bio)polymers to modify the physical chemical surface properties or the introduction of functional groups on the surface. The research presented focuses on specific enzymatic surface modification of PET to obtain functional structured surfaces. Control of enzymatic action at correct time and length scales is a prerequisite to achieve the desired functionalities. The research will result in new, specific knowledge and technologies to create biotechnologically modified textile materials with unique properties. The research contributes to bio-based economy through the development of novel processes for textiles exhibiting the desired functionalities and through development of novel enzyme technology for structuring and functionalisation of surfaces. Acknowledgements: This work is supported by a grant of the European Commission, FP7, Grant Agreement Number PIEF-GA-2008-219665.

Surface Functionalization of Poly(ethylene terephthalate) Film and Membrane by Controlled Wet Chemistry: Chemical Characterization of Carboxylated Surfaces

Generation of Active Amino Groups on the Surface of a Polyethylene Terephthalate Film and Their Quantitative Evaluation

Surface Modification on Polyethylene Terephthalate Films with 2-Methacryloyloxyethyl Phosphorylcholine.

Surface Modification of PET Films Using Pulsed AC Plasma Polymerisation Aimed at Preventing Protein Adsorption

Surface Functionalization Technique For Conferring Antibacterial Properties To Polymeric And Cellulosic Surfaces

Surface Modification of Poly(tetrafluoroethylene) Films Via Plasma Treatment and Graft Copolymerization of Acrylic Acid

Surface modification of poly(ethylene terephthalate) via hydrolysis and layer-by-layer assembly of chitosan and chondroitin sulfate to construct cytocompatible layer for human endothelial cells.

Modification of Amorphous Poly(ethylene Terephthalate) Surface by UV Light and Plasma for Fabrication of an Electrophoresis Chip with an Integrated Gold Microelectrode

Atomic force microscopy characterization of polyethylene terephthalate grafting with poly(styrene sulfonate)

Enzyme biocatalyst route to superhydrophobic surfaces on microstructured poly(ethylene terephthalate) film

Facile Preparation of a Patterned, Aminated Polymer Surface by UV-Light-Induced Surface Aminolysis

Surface Modification And Functionalization Of Polytetrafluoroethylene Films Via Graft Copolymerization

Preparation and Characterization of Nonfouling Polymer Brushes on Poly(Ethylene Terephthalate) Film Surfaces

Treatment of PET Nonwoven with a Water Vapor or Carbon Dioxide Plasma

Surface Modification And Functionalization Of Polytetrafluoroethylene Films

Surface modification of a biomedical polyethylene terephthalate (PET) by air plasma

Biotechnological modification of polyester surfaces

Surface Modification of Polymeric Films and Membranes to Achieve Antibacterial Properties

Surface Functionalization of Polyimide Films Via Chloromethylation and Surface-Initiated Atom Transfer Radical Polymerization

Poly(Vinyl Alcohol) Hydrogel Fixation on Poly(Ethylene Terephthalate) Surface for Biomedical Application

Processing and characterization of multilayer films of poly(ethylene terephthalate) and surface-modified poly(tetrafluoroethylene)