Abstract:Surface contact disinfecting technique is a newly developed method for water sterilization. To prepare the antibacterial material having special ability and deeply study the antibacterial process and mechanism of surface contact disinfectant containing quaternary ammonium salts, the antibacterial and temperature responsive functional copolymer (poly (DMAE-BC-co-NIPAAm)) was introduced onto the surface of polyethylene (PE) films by UV-induced photo-grafting method. IR showed that the copolymer of DMAE-BC and NIPAArn were successfully grafted onto the film. The surface of photo-grafted films was investigated through water contact angle (CA) measurements. It was found that the hydrophobicity of the co-grafted film increased with the temperature increasing from 20 degrees C to 40 degrees C. The antibacterial properties of the co-grafted film were mainly investigated using Escherichia coli (E. coli), a kind of gram-negative bacteria, as model bacterium. First, the desorption of bacteria cells adsorbed on the surface co-grafted films was measured. In the 1 mol/L NaCl solution I lower than 35 % bacteria cells was rinsed out from grafted films because the positive change on the antibacterial film surface was shielded, and the desorption rate of E. coli cells decreased with increasing temperature from 20 degrees C to 40 degrees C. The cell-lysis action to bacteria cell was further investigated by measuring the activity of beta-galactosidase. The antibacterial film was put into the cell suspension containing O-nitraphenyl beta-D-galactopyranoside (ONPG) and the changes of absorption at 400 nm with time were measured. The fact indicated that the co-grafted film disrupted the cell inner membrane, and the destroying action to the cell increased with increasing temperature from 20 degrees C to 40 degrees C. The co-grafted film was believed to have both the antibacterial ability and temperature sensitivity, and the antibacterial ability changed with the temperature. The experimental results clearly showed the hydrophobic action played an important effect in both the desorption and cell-lysis steps.

Surface modification of poly(ethylene terephthalate) (PET) film by gamma-ray induced grafting of poly(acrylic acid) and its application in antibacterial hybrid film

Novel Synthesis of Ag NPs on Polymer Fabrics by a Green Method for Antibacterial Performance

Improving the Hydrophilicity of Poly(vinylidene Fluoride) Porous Membranes by Electron Beam Initiated Surface Grafting of AA/SSS Binary Monomers

Catalytic Amounts of an Antibacterial Monomer Enable the Upcycling of Poly(Ethylene Terephthalate) Waste

Fully bio-based flame retardant and antibacterial coating for polyethylene terephthalate fabric

PREPARATION AND ANTIBACTERIAL FUNCTION OF PE FILMS CO-GRAFTED WITH DMAE-BC AND NIPAAM

Characterization of antibacterial nanocomposites of polyethylene terephthalate filled with nanosilver-doped carbon black

Antibacterial Coatings of Biomedical Surfaces by Polydextran Aldehyde/Polyethylenimine Nanofibers.

Modification of Amorphous Poly(ethylene Terephthalate) Surface by UV Light and Plasma for Fabrication of an Electrophoresis Chip with an Integrated Gold Microelectrode

Upcycling Poly(ethylene Terephthalate) Refuse to Advanced Therapeutics for the Treatment of Nosocomial and Mycobacterial Infections

Radiation-induced graft copolymerization of acrylic acid/acrylonitrile onto LDPE and PET films and its biodegradability

Radiation Grafting of Glycidyl Methacrylate and Divinylbenzene Onto Polyethylene Terephthalate Fabrics for Improving Anti-Dripping Performance

[Enhancing PET Degradation Efficiency Through Fusing Carbohydrate-Binding Modules in LCC-ICCG].

Surface Functionalization of Poly(ethylene terephthalate) Film and Membrane by Controlled Wet Chemistry: Chemical Characterization of Carboxylated Surfaces

Surface Modification of Poly(tetrafluoroethylene) Films Via Plasma Treatment and Graft Copolymerization of Acrylic Acid

Development of antimicrobial thermoplastic material from archaeal poly-γ-L-glutamate and its nanofabrication

Anti-dripping PET Fabrics Prepared by Two Steps Radiation-induced Grafting

PHOTOGRAFTING OF ACRYLIC ACID ONTO POLY(ETHYLENE TEREPHTHALATE) FILM

Can Superhydrophobic PET Surfaces Prevent Bacterial Adhesion?

Generation of Active Amino Groups on the Surface of a Polyethylene Terephthalate Film and Their Quantitative Evaluation

Determination of Key Factors Affecting Biofilm Formation on the Aged Poly(ethylene Terephthalate) During Anaerobic Digestion.