Abstract:In the field of hypersonic systems and their missions, the occurring flows impose extreme mechanical and thermal loads on the materials used. At the German Aerospace Center (DLR), extensive research is conducted in this area, ranging from design and specification to the development of suitable materials concluding with the proof of concept under realistic conditions in wind tunnels. In recent years, ceramic matrix composites (CMCs) have been investigated for specific aspects of hypersonics. These materials exhibit consistent mechanical behavior over a wide temperature range (up to 1600 °C), coupled with high damage tolerance and thermal shock resistance, distinguishing them from metals and superalloys. Particularly, special porous C/C–SiC ceramics (carbon-fiber-reinforced carbon with silicon carbide) enable innovative material applications for components in transpiration cooling, fuel injection, or boundary-layer transition control. The work presented focuses on the next generation of porous C/C–SiC ceramics currently in development. By deliberately modifying the textile preform, the resulting microstructure and pore morphology are influenced, allowing for control over both the total volume and the orientation of the pores. Relevant parameters influencing porosity have been determined based on the results, and an initial characterization has been conducted. It has been demonstrated that there is a preferred direction of porosity within the sample thickness (Z-axis), and in terms of hypersonic-relevant properties, an absorption coefficient of 0.58 for an acoustic wave at 500 kHz (static pressure of 15 kPa), as well as a length-specific flow resistance of 3.4 MPa s/m 2 and an overall porosity of 12.25% were determined. Building upon these promising initial findings, the goal is to further expand the understanding of the parameters influencing porosity and to generate a tailored material for different application scenarios by correlating them with hypersonic properties.

Development of Porous Ti64 by Partial Densification in Spark Plasma Sintering for Laminar Flow Control

Preparation, Characterization and Designing of Porous Ti–6Al–4V Through Metal Injection Molding Without Space Holder

Fabrication of Porous Materials by Spark Plasma Sintering: A Review

Fabrication of Titanium-Niobium-Zirconium-Tantalium Alloy (TNZT) Bioimplant Components with Controllable Porosity by Spark Plasma Sintering

Use of Spark Plasma Sintering for Fabrication of Porous Titanium Aluminide Alloys from Elemental Powders

Morphology, Flow and Heat Transfer in Triply Periodic Minimal Surface Based Porous Structures

Correlation between permeation performance and structural evolution of Al-doped lamellar porous Ti 3 SiC 2 through freeze casting

Microstructure and properties of porous Si 3 N 4 ceramics fabricated by digital light processing combined with spark plasma sintering

A study of the microstructures and mechanical properties of Ti6Al4V fabricated by SLM under vacuum

Heat Transfer in Porous Media Applied to Liquid Rocket Engines

Influencing Factors for the Microstructure and Mechanical Properties of Micro Porous Titanium Manufactured by Metal Injection Molding

Preparation, Microstructure and Mechanical Properties of Porous Titanium Sintered by Ti Fibres

Designing High-Porosity Porous Structures with Complex Geometries for Enhanced Thermal Conductivity Using Selective Laser Melting and Heat Treatment

In-situ X-ray tomography on permeability evolution of C/SiC porous ceramic for hypersonic vehicles

Quantification of dominant diffusion processes through plasma enhanced chemical vapor deposition-coated plastics by combining two complementary methods for porosity analysis

Towards Enhanced Sintering Resistance: Air-plasma-sprayed Thermal Barrier Coating System with Porosity Gradient

The effect of porosity on the mechanical properties of Ti-6Al-4V components manufactured by high-power selective laser melting

Production of porous titanium structures by combining hot isostatic pressing and solid-state foaming

Transpiration Cooling for Additive Manufactured Porous Plates with Partition Walls

Tailored directional porosity in ceramic matrix composites (CMCs) for hypersonic applications

Evaluation of Pore-Former Size and Volume Fraction on Tape Cast Porous 430 Stainless Steel Substrates for Plasma Spraying