Abstract:Purpose Fused filament fabrication (FFF) technique using metal filled filaments in combination with debinding and sintering steps can be a cost-effective alternative for laser-based powder bed fusion processes. The mechanical behaviour of FFF-metal materials is highly dependent on the processing parameters, filament quality and adjusted post-processing steps. In addition, the microstructural material properties and geometric characteristics are inherent to the manufacturing process. The purpose of this study is to characterize the mechanical and geometric performance of three-dimensional (3-D) printed FFF 316 L metal components manufactured by a low-cost desktop 3-D printer. The debinding and sintering processes are carried out using the BASF catalytic debinding process in combination with the BASF 316LX Ultrafuse filament. Special attention is paid on the effects of build orientation and printing strategy of the FFF-based technology on the tensile and geometric performance of the 3-D printed 316 L metal specimens. Design/methodology/approach This study uses a toolset of experimental analysis techniques [metallography and scanning electron microcope (SEM)] to characterize the effect of microstructure and defects on the material properties under tensile testing. Shrinkage and the resulting porosity of the 3-D printed 316 L stainless steel sintered samples are also analysed. The deformation behaviour is investigated for three different build orientations. The tensile test curves are further correlated with the damage surface using SEM images and metallographic sections to present grain deformation during the loading progress. Mechanical properties are directly compared to other works in the field and similar additive manufacturing (AM) and Metal Injection Moulding (MIM) manufacturing alternatives from the literature. Findings It has been shown that the effect of build orientation was of particular significance on the mechanical and geometric performance of FFF-metal 3-D printed samples. In particular, Flat and On-edge samples showed an average increase in tensile performance of 21.7% for the tensile strength, 65.1% for the tensile stiffness and 118.3% for maximum elongation at fracture compared to the Upright samples. Furthermore, it has been able to manufacture near-dense 316 L austenitic stainless steel components using FFF. These properties are comparable to those obtained by other metal conventional processes such as MIM process. Originality/value 316L austenitic stainless steel components using FFF technology with a porosity lower than 2% were successfully manufactured. The presented study provides more information regarding the dependence of the mechanical, microstructural and geometric properties of FFF 316 L components on the build orientation and printing strategy.

Study of the hinge thickness deviation for a 316L parallelogram flexure mechanism fabricated via selective laser melting

Finite Element Analysis of Displacement Performances of Flexure Hinge Mechanism Affected by Machining Errors

Design And Optimization Of Flexure Hinges

Stiffness characteristics of a laser beam melted (LBM) additive-manufactured flexure mechanism

Investigation of the Effect of Artificial Internal Defects on the Tensile Behavior of Laser Powder Bed Fusion 17–4 Stainless Steel Samples: Simultaneous Tensile Testing and X-Ray Computed Tomography

Fabrication, Experiments, and Analysis of an LBM Additive-Manufactured Flexure Parallel Mechanism

Parametric Finite Element Analysis Of Output Displacement Affected By Machining Errors Of Flexure Hinge Mechanism

Threshold investigation of shell thickness for enhanced mechanical and tribological performance in 3D-printed curved sandwich structures

Static Deformation Modeling and Analysis of Flexure Hinges Made of a Shape Memory Alloy

A Review and a Statistical Analysis of Porosity in Metals Additively Manufactured by Laser Powder Bed Fusion

Study of thermal stress deformation in hybrid 3D printing and milling process of PEEK material

Thermo-mechanical modeling of lattice-core sandwich panels in powder bed fusion

Comprehensive study on shape shifting behaviors in FDM-based 4D printing of bilayer structures

Investigations on the Forming Characteristics of a Novel Flexible Incremental Sheet Forming Method for Low-Ductility Metals at Room Temperature

Distortion Analysis of Generatively Designed Hinge Bracket Using Meso-Scaled Thermomechanical Simulation with Experimental Validation

Design Methodology and Performance Analysis of Application-Oriented Flexure Hinges.

In Situ X-ray Micro-Computed Tomography Study of the Damage Evolution of Prefabricated Through-Holes in SLM-Printed AlSi10Mg Alloy under Tension

Numerical investigation of residual stresses in thin-walled additively manufactured structures from selective laser melting

Additive manufacturing of 316L stainless-steel structures using fused filament fabrication technology: mechanical and geometric properties

Analysis on Displacement Performance Affected by Machining Errors of Single-Notch Right Circular Flexure Hinge

Microstructure Design for 3D Printed Metal Prosthesis of Adjustable Modulus