Abstract:Powder metallurgy (PM) technology is expected to provide a promising strategy for the cost-effective and highly efficient utilization of spherical Ti–6Al–4V powders with particles size of large than 150 μm to reduce material waste. However, how to overcome the problem of low sinterability and poor ductility of coarse lamellar microstructures of large-diameter spherical powders are still remains a significant challenge. In this study, Ti–6Al–4V alloys were prepared by spark plasma sintering (SPS) at different sintering temperatures with plasma rotating electrode process (PREP) large-diameter spherical powders (∼156 μm). The microstructure evolution, grain structure, mechanical properties and fracture mechanisms were systematically investigated. Results demonstrate that the acicular martensite structure inside the unmelted particles changed to a uniform and fine α/β lamellar microstructure with the increased sintering temperature. Consequently, the Ti–6Al–4V alloys exhibit excellent strength-ductility at 925 °C. (ultimate tensile strength of 881 MPa and elongation up to 14.8 %). Fundamentally, the excellent strength-ductility was attributed to the uniform and dense fine α/β lamellar structure that enhanced the effective bearing area during deformation. The stacked dislocations at the α/β phase interface provided high strength. In addition, the high-density α/β phase interface in the matrix reduced the mean free path of the dislocation, which resulted in a high strain hardening rate of the high-density geometrically necessary dislocations (GNDs) and delayed the premature fracture. The intergranular brittle fracture mode of the alloys changed to the ductile fracture mode. These findings have important implications for recycling super-large diameter spherical powders.

Morphology and particle analysis of the Ni3Al-based spherical powders manufactured by supreme-speed plasma rotating electrode process

Nucleation on Thermal History and Microstructural Evolution of Atomized Ti-48Al Nano and Micro-Powders

Surface characterization of plasma rotating electrode atomized 30CrMnSiNi2A steel powder

Effects of plasma rotating electrode process parameters on the particle size distribution and microstructure of Ti-6Al-4 V alloy powder

Nanoparticles Modeling in Axially Injection Suspension Plasma Spray of Zirconia and Alumina Ceramics

Preparation and Characterization of Ni Nanopowders Prepared by Anodic Arc Plasma

Characterization of pre-alloyed NiTi powders produced by electrode induction-melting inert gas atomization for additive manufacturing

Preparations and Electrochemical Properties of Amorphous Ti-Al Alloys

Characterization of particle shape of nickel-based superalloy powders using image processing techniques

Controllable Preparation of Spherical Molybdenum Nano-Powders by One-Step Reduction of APM in Radio Frequency Hydrogen Plasma

Preparation and characterization of rare earth modified nanocrystalline Al2O3/13 wt%TiO2 feedstock for plasma spraying.

Particle morphology and size distribution of plasma processed aluminium powder

Structure and Strength of Aluminum with Sub-Micrometer/micrometer Grain Size Prepared by Spark Plasma Sintering

Achieving excellent strength-ductility combination in Ti–6Al–4V alloy by spark plasma sintering technology using large-diameter PREP spherical powder

Gas-Atomized Nickel Silicide Powders Alloyed with Molybdenum, Cobalt, Titanium, Boron, and Vanadium for Additive Manufacturing

Titanium-Tantalum Alloy Powder Produced by the Plasma Rotating Electrode Process (PREP)

Method of W-Ni-Fe Composite Spherical Powder Production and the Possibility of Its Application in Selective Laser Melting Technology

Synthesis and structural features of Ni–Al nanoparticles by hydrogen plasma–metal reaction

Production of Spheroidized Micropowders of W-Ni-Fe Pseudo-Alloy Using Plasma Technology

Study on the Flow Properties of Ti-6Al-4V Powders Prepared by Radio-Frequency Plasma Spheroidization

Effect of APS Spraying Parameters on the Microstructure Formation of Fe3Al Intermetallics Coatings Using Mechanochemically Synthesized Nanocrystalline Fe-Al Powders