Abstract:With the arrival of the Fifth Generation (5G) communication era, there has been an urgent demand for acoustic filters with a high frequency and ultrawide bandwidth used in radio-frequency (RF) front-ends filtering and signal processing. First-order antisymmetric (A1) lamb mode resonators based on LiNbO3 film have attracted wide attention due to their scalable, high operating frequency and large electromechanical coupling coefficients (K2), making them promising candidates for sub-6 GHz wideband filters. However, A1 mode resonators suffer from the occurrence of transverse modes, which should be addressed to make these devices suitable for applications. In this work, theoretical analysis is performed by finite element method (FEM), and the admittance characteristics of an A1 mode resonator and displacement of transverse modes near the resonant frequency (fr) are investigated. We propose a novel Dielectric-Embedded Piston Mode (DEPM) structure, achieved by partially etching a piezoelectric film filled with SiO2, which can almost suppress the transverse modes between the resonant frequency (fr) and anti-resonant frequency (fa) when applied on ZY-cut LiNbO3-based A1 mode resonators. This indicates that compared with Broadband Piston Mode (BPM), Filled-broadband Piston Mode (FPM) and standard structures, the DEPM structure is superior. Furthermore, the design parameters of the resonator are optimized by adjusting the width, depth and filled materials in the etched window of the DEPM structure to obtain a better suppression of transverse modes. The optimized A1 mode resonator using a DEPM structure exhibits a transverse-free response with a high fr of 3.22 GHz and a large K2 of ~30%, which promotes the application of A1 mode devices for use in 5G RF front-ends.

Design and analysis of Piezoelectric MEMS Varactor loaded on QMSIW filter for 5G Communication

Design of a MEMS varactor and Analysis of its Phase Noise

Toward Ka Band Acoustics: Lithium Niobate Asymmetrical Mode Piezoelectric MEMS Resonators

Research on CMOS Mm-Wave Circuits and Systems for Wireless Communications

High-Performance Surface Acoustic Wave Devices Using LiNbO3/SiO2/SiC Multilayered Substrates

High-Performance Surface Acoustic Wave Devices Using LiNbO 3 /SiO 2 /SiC Multilayered Substrates

Monolithic 1–6-Ghz Multiband Acoustic Filters Using SH-SAW and LLSAW on LiNbO$_{3}$/SiO$_{2}$/SiC Platform

Design and Modeling of a Continuously Variable Piezoelectric RF MEMS Switch

Compact Quarter-Mode Substrate-Integrated Waveguide Dual-Frequency Millimeter-Wave Antenna Array for 5G Applications

Analysis and optimization of a side pull-down electrodes controlled MEMS varactor

Design of High-Q Film Bulk Acoustic Resonator for 5G Applications

A reconfigurable filter based on quarter-mode substrate integrated waveguide (QMSIW) resonator

Thin Film Encapsulation for RF MEMS in 5G and Modern Telecommunication Systems

Piezoelectric MEMS—evolution from sensing technology to diversified applications in the 5G/Internet of Things (IoT) era

Partially Etched Piezoelectric Film Filled with SiO2 Structure Applied to A1 Mode Resonators for Transverse Modes Suppression

Millimeter-Wave Liquid Crystal Polymer Based Conformal Antenna Array for 5G Applications

A MMIC GaN Power Amplifier Design for 5G Communication System

Wideband Surface Acoustic Wave Filter at 3.7 GHz With Spurious Mode Mitigation

A near spurious-free 6 GHz LLSAW resonator with large electromechanical coupling on X-cut LiNbO3/SiC bilayer substrate

Near 5-GHz Longitudinal Leaky Surface Acoustic Wave Devices on LiNbO$_{3}$/SiC Substrates