Abstract:Fractal analysis was performed on carbonate core plug samples from the Ordovician Majiagou carbonate reservoirs in the Ordos Basin using mercury intrusion capillary pressure (MICP), nuclear magnetic resonance (NMR), and the x-ray computed tomography (CT) measurements to improve our understanding of the pore structure characteristics. The relationships between pore structure parameters and the fractal dimensions were investigated. The pore systems are dominated by secondary intercrystalline pores and enlarged dissolution pores as well as microfractures. The fractal curves from MICP analysis break into two segments at the Swanson's parameter. The small pore-throat systems can be described by the fractal theory, whereas pores connected by relatively large throats (greater than the pore-throat radius at the Pittman's hyperbola's apex) are not cylindrical in shape, cannot be described by a capillary tube model, and tend to have apparent fractal dimensions larger than 3.0. The fact that the entirety of the capillary curve cannot be fit by a single fractal dimension implies that there are multiple pore systems present with different fractal dimensions. The CT analysis shows that the pores are dispersed in the three-dimensional spaces mainly with elliptical shapes. The NMR measurements are sensitive to pore-body size and MICP probes pore-throat dimensions, the latter being complementary to the pore-body–size distribution. None of the CT, MICP, and NMR techniques provide "right" or "wrong" answers to the pore-throat systems, but they probe different aspects of the pore systems. This study assumes the pore shapes to be spherical in general, and then the fractal dimension is calculated from the NMR transverse relaxation time (T2) spectrum. The fractal dimensions of all the samples are calculated, and the accuracy of the fractal model is verified by the high regression coefficients. Almost all the pore systems can be described by fractal theory, and the fractal dimensions are strongly correlated with the T2 values separating the immovable fluid and the free fluid. Microfractures may bias T2 toward larger values, making it hard to derive fractal dimensions from NMR measurements. The coexistence of small pores (pore radius < 10 μm) and large pores (>50 μm) results in a heterogeneous pore distribution and a high fractal dimension. Reservoir quality increases with the complexity degree of the microscopic pore structure. Conversely, samples that are dominated by small pore systems tend to have a lower fractal dimension and a less complex pore structure.

Quantitative Description of Pore and Fracture Distribution Heterogeneity Using Mercury Removal Curve and Applicability of Fractal Models

Heterogeneity of Pore and Fracture Structure in Coal Reservoirs by Using High-Pressure Mercury Intrusion and Removal Curve

A Physical Parameter Characterizing Heterogeneity of Pore and Fracture Structures in Coal Reservoirs

Description of Pore Structure of Carbonate Reservoirs Based on Fractal Dimension

Limited fractal behavior in cement paste upon mercury intrusion porosimetry test: Analysis and models

Pore Structure Damages In Cement-Based Materials By Mercury Intrusion: A Non-Destructive Assessment By X-Ray Computed Tomography

Research On The Fractal and Percolation Characteristics of Coal-Based Porous Media For Filtration and Impregnation

Multi-method characterization of sandstone pore size distribution heterogeneity and its influence on porosity and permeability variation

FRACTAL ANALYSIS OF STRESS-DEPENDENT DIFFUSIVITY OF POROUS CEMENTITIOUS MATERIALS

Assessment on Pore Structure of Western Sichuan Reservoir Through Mercury Intrusion Porosimetry

Pore Size Distribution Characteristics of High Rank Coal with Various Grain Sizes

Methodological Study on the Full-Range Pore Structure and Fractal Characteristics of the Tight Reservoirs

Multifractal Analysis of Pore Structure in Middle- and High-Rank Coal by Mercury Intrusion Porosimetry and Low-Pressure N2 Adsorption

Pore-scale modeling of hydromechanical coupled mechanics in hydrofracturing process: Mechanics in Hydrofracturing

Characterizing the shape, size, and distribution heterogeneity of pore-fractures in high rank coal based on X-ray CT image analysis and mercury intrusion porosimetry

Application of fractal theory to predict the coal permeability of multi-scale pores and fractures

Fractal Permeability Model For Power-Law Fluids In Fractured Porous Media With Rough Surfaces

3D digital rock modeling of the fractal properties of pore structures

Pore structure and fractal characteristics of Ordovician Majiagou carbonate reservoirs in Ordos Basin, China

Pore Structure and Fractal Characteristics of Coal-Measure Sedimentary Rocks Using Nuclear Magnetic Resonance (NMR) and Mercury Intrusion Porosimetry (MIP)

3D multi‐fractal analysis of porous media using 3D digital images: considerations for heterogeneity evaluation