Abstract:Selective removal and resource recovery of ammonium nitrogen (NH4+–N) from high-strength ammonium waste streams is of practical importance for biological wastewater treatment and environmental protection. In this study, we demonstrate the simultaneous removal and reclamation of ammonium from synthetic digested sludge centrate via a novel osmosis-distillation hybrid membrane (ODHM) process. Using NaHCO3 as the draw solute, ammonium diffuses from the synthetic centrate to the draw solution by utilizing the bidirectional cation transport nature of the thin film composite (TFC) membrane. Then, NH4+ is converted to gaseous NH3 at 60 °C and recovered by a sweeping gas membrane distillation (SGMD) process. Herein, the bidirectional transport of monovalent cations in the osmotic process, selectivity of TFC membranes for different cations, and recovery of the draw solution following the extraction of ammonia through the SGMD process were systematically investigated. The removal of NH4+–N from the synthetic centrate achieved 21.34% during a 6-h continuous operation of the ODHM system, with ammonium fluxes through the TFC and SGMD membranes at 1.39 and 0.57 mol m–2 h–1, respectively. A secondary interfacial polymerization was proposed to further enhance ammonium transport through the TFC membrane. Results reported here highlight the potential of the ODHM process for the selective removal and reclamation of ammonium from ammonium-rich waste streams.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.0c01496?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.0c01496</a>.S1, Experimental protocol for selective removal and reclamation of ammonium nitrogen; S2, silver binding method; S3, supplemental description of analytical methods; S4, bidirectional transport of ions through the TFC membrane; Figure S1, schematic diagram of the lab-scale ODHM system; Figure S2, effect of NaHCO3 background on the accuracy of NH4+–N measurement; Figure S3, influence of NaHCO3 background concentration on measurement accuracy during ICP-OES analysis of K+, Ca2+, and Mg2+; Figure S4, fluxes of reverse and forward transported ions in the osmotic process; Figure S5, specific salt flux (SFF) for cations of the TFC membrane; Figure S6, conductivity, pH, water flux, and the ammonium concentration in centrate as a function of experimental time during the treatment of synthetic centrate by ODHM process; Figure S7, SSF for NH4+ of the TFC pristine and modified membranes; Table S1, brief summary of biological treatments, chemical/physical extractions, and membrane processes on ammonium removal; Table S2, composition and pH of the feed and draw solutions for the experiments in <a class="internalNav" href="#fig1">Figure </a><a class="internalNav" href="#fig1">1</a>B; and Table S3, composition of the feed and draw solutions for the experiments in <a class="internalNav" href="#fig1">Figure </a><a class="internalNav" href="#fig1">1</a>E (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.0c01496/suppl_file/es0c01496_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Ammonia Concentrator for Repeatable Adsorption/Desorption Using Nickel Hexacyanoferrate as Adsorbent and Production of Solid Ammonium Bicarbonate

Experimental Study on Carbon Dioxide Absorption by Aqueous Ammonia with Nickel and Chromium Ions in Bubbling Tower at Low Temperatures

Reducing Aerosol and Ammonia Emission in Post-Combustion CO2 Capture: Additives As Key Solutions

A highly efficient modified nano-activated carbon adsorbent for separation of ammonia from water: Experimental and kinetics elucidations

Deep Purification of Low-Strength Ammonium-Containing Wastewater with ANRE Process

Efficient Adsorption of Ammonia by Surface-Modified Activated Carbon Fiber Mesh

Ammonia removal by adsorptive clinoptilolite ceramic membrane: Effect of dosage, isothermal behavior and regeneration process

Utilization of Bidirectional Cation Transport in a Thin Film Composite Membrane: Selective Removal and Reclamation of Ammonium from Synthetic Digested Sludge Centrate via an Osmosis–Distillation Hybrid Membrane Process

Stepwise Ammonium Enrichment Using Selective Battery Electrodes

Modified Carbon Nitride As an Efficient Adsorbent for Ammonia Nitrogen with Low Concentration

Separation and recovery of ammonium from industrial wastewater containing methanol using copper hexacyanoferrate (CuHCF) electrodes

Enhancing Resource Recovery through Electro-Assisted Regeneration of an Ammonia-Selective Cation Exchange Resin

Nickel-Based Membrane Electrodes Enable High-Rate Electrochemical Ammonia Recovery.

Ambient Electrosynthesis of Ammonia: Electrode Porosity and Composition Engineering

A novel method for production of nitrogen fertilizer with low energy consumption by efficiently adsorbing and separating waste ammonia

Ambient Electro-Synthesis of Ammonia - Electrode Porosity and Composition Engineering

Ammonium Recovery from Manure Wastewater and Simultaneous Electrosynthesis Using Ammonium-Ion Selective Redox Material

A Novel Method to Recover Ammonia Loss in Ammonia‐based CO 2 Capture System: Ammonia Regeneration by Vacuum Membrane Distillation

Improving Absorbent-Enhanced Ammonia Separation For Efficient Small-Scale Ammonia Synthesis

Efficient removal of ammonia nitrogen via a coupled system of Ni 1 Cu 0.2 -Se-T/CP anode and copper foam cathode

Achieving a Thermodynamic Self‐Regulation Dynamic Adsorption Mechanism for Ammonia Synthesis through Selective Orbital Coupling