Abstract:Cryo-rolled aluminum alloys have a much higher strength-to-weight ratio than cold-rolled alloys, which makes them invaluable in the aerospace and automotive industries. However, this strength gain is frequently accompanied by a formability loss. When uniformly applied to the blank surface, hydroforming provides a solution by generating geometries with constant thickness, making it possible to produce complex structures with "near-net dimensions", which are difficult to achieve with conventional approaches. This study delves into the cavity die sheet hydroforming (CDSHF) process for high-strength cryo-rolled AA5083 aluminum alloy, focusing on two primary research questions. Firstly, we explored the utilization of a nonlinear 3D finite-element (FE) model to understand its impact on the dimensional accuracy of hydroformed components within the CDSHF process. Specifically, we investigated how decreasing fluid pressure and increasing the holding time of peak fluid pressure can be quantitatively assessed. Secondly, we delved into the optimization of process parameters—fluid pressure (FP), blank holding force (BHF), coefficient of friction (CoF), and flange radius (FR)—to achieve dimensional accuracy in hydroformed square cups through the CDSHF process. Our findings reveal that our efforts, such as reducing peak fluid pressure to 22 MPa, implementing a 30 s holding period, and utilizing an unloading path, enhanced component quality. We demonstrated this with a 35 mm deep square cup exhibiting a 16.1 mm corner radius and reduced material thinning to 5.5%. Leveraging a sophisticated nonlinear 3D FE model coupled with response surface methodology (RSM) and multi-objective optimization techniques, we systematically identified the optimal process configurations, accounting for parameter interactions. Our results underscore the quantitative efficacy of these optimization strategies, as the optimized RSM model closely aligns with finite-element (FE) simulation results, predicting a thinning percentage of 5.27 and a corner radius of 18.64 mm. Overall, our study provides valuable insights into enhancing dimensional accuracy and process optimization in CDSHF, with far-reaching implications for advancing metal-forming technologies.

Formation of concavities on the ends of parts manufactured on CNC skew rolling mills

Evolution of Residual Stress Based on Curvature Coupling in Multi-Roll Levelling

Study on near-net forming technology for bars by axial feed skew rolling based on taper-end billets

The Finite Element Analysis Of Serrated Chip Formation In High-Speed Cuffing Auto Panel Dies

Study of CNC skew rolling of hollow rail axles with a mandrel

A Numerical Study of the Effects of Roller Paths on Dimensional Precision in Die-Less Spinning of Sheet Metal

Influence of the rotational speed ratio of rollers on the three-dimensional surface rolling process

An Analysis of the Effect of Skew Rolling Parameters on the Surface Quality of C60 Steel Parts Using Classification Models

Numerical simulation of void elimination in the billet during hot shape rolling processes based on the Gurson–Tvergaard–Needleman model

Effects of Geometric and Spindle Errors on the Quality of End Turning Surface

Formation and reduction of taper in electrochemical single-pass milling grooves

Spinning of curvilinear generatrix parts without mandrel based on main and auxiliary rollers

Numerical Modelling of Chamfer Billet of High Carbon Steel During Continuous Casting

Comparative Studies on a Chamfer Technology and a Convex Roll Technology During the Soft Reduction Process

The Mechanism of Forming Hollow Shafts with Constant Wall Thickness by Three-Roll Skew Rolling

Numerical Prediction of Microstructure Evolution of Small-Diameter Stainless Steel Balls during Cold Skew Rolling

Modeling of Deep Rolling as a Distortion Compensation Strategy during Profile Grinding

Computer Aided Engineering in the application of rotational forming of axially asymmetric geometries

Effect of Shape Tool Parameters on the Performance of Cold Circular Three-Dimensional Pilger Cross-Section Roll Forming

A 3D Non-Linear FE Model and Optimization of Cavity Die Sheet Hydroforming Process

Study on manufacturing of special-shaped ends blank for cross wedge rolling without stub bar