Abstract:Anion-exchange membrane water electrolyzers (AEMWEs) present a multitude of advantages, particularly in the utilization of non-platinum group (non-PGM) catalysts. While diverse catalysts have demonstrated notable electrocatalytic activity in alkaline conditions, the integration of the ionomer with the electrocatalyst at the active catalyst layer is crucial for enhancing overall AEMWE performance in practical device demonstrations by improving mass transport. However, the intrinsic instability of polymeric ionomers, leading to physical detachments or alkaline (chemical) degradation, poses a challenge that can potentially diminish performance. In this study, drawing inspiration from the aforementioned ionomer chemistry, we introduce non-PGM NiFe-based metal-organic frameworks (MOFs) incorporating quaternary ammonium (QA) cation moieties covalently functionalized to benzenedicarboxylic acid (BDC) ligands as promising electrocatalysts for the oxygen evolution reaction (OER) in alkaline environments. Three specifically designed functional groups with varying ion exchange capacities (IEC) and alkaline stability—trimethylamine (TMA), N-methylpyrrolidine (C 4 N), and N-methylpiperidine (C 5 N)—were directly tethered to BDC ligands. The alkaline OER activity of Ni 2 Fe 1 -QA-MOF was meticulously assessed using rotating disk electrodes and AEMWE devices. These directly tethered QA groups markedly facilitated improved ionic transport of OH - ions at the catalyst/electrolyte interfaces compared to BDC ligands, ultimately leading to a significant enhancement in half-cell activity and AEMWE performance. In-situ IR/RAMAN spectroscopy revealed that QA moieties highly promoted local ionic transport at the interfaces, as evidenced by characteristic peaks indicating a robust interaction between QA and OH - ions. Unexpectedly, QA moieties not only contributed to ionic transport in local environments but also induced oxidation states of Ni metal sites, while Fe sites exhibited no changes during the applied potential in the OER region, as comprehensively revealed by synchrotron X-ray absorption spectroscopy (XAS). In comparison with conventional NiFe layered double hydroxide (LDH) structures, we posit that the substantial structural transformation of Ni moieties can be attributed to an increased degree of M-O bond interaction, enhanced by the local interaction between QA and OH - ions. Density functional theory (DFT) calculations also validate the balanced adsorption of OER intermediates on QA-MOFs. Finally, QA-NiFe-MOF was directly synthesized on a porous transport layer (PTL), and its AEMWE performance was evaluated without the use of any ionomer. At 1.0 M KOH, C 4 N, C 5 N, and TMA-based NiFe MOFs exhibited current densities of 9.35 A/cm 2 , 9.11 A/cm 2 , and 7.6 A/cm 2 , respectively. These current densities surpassed those of bare BDC-NiFe MOF and commercial IrO 2 anode catalysts, which exhibited only 7.39 A/cm 2 and 6.4 A/cm 2 , respectively. Consequently, we emphasize that the facilitation of local ionic transport could yield remarkable AEMWE performance, even in the absence of conventional polymeric ionomers.

An oxide-promoted, self-supported Ni4Mo catalyst for high current density anion exchange membrane water electrolysis

Anion Modulate the Morphological and Electronic Structure of NiFe-based Electrocatalyst for Efficient Urea Oxidation-Assisted Water Electrolysis

Effective modulating of the Mo dissolution and polymerization in Ni4Mo/NiMoO4 heterostructure via metal-metal oxide-support interaction for boosting H2 production

N, P co-doped Ni/Mo-based multicomponent electrocatalysts in situ decorated on Ni foam for overall water splitting

High‐Efficiency Anion Exchange Membrane Water Electrolysis Employing Non‐Noble Metal Catalysts

Highly Active Nanostructured NiCoMo-Based Catalyst for Oxygen Evolution in Anion-Exchange Membrane Water Electrolysis

Interstitial boron-doped Ni 4 Mo nanoarray catalyst boosts stable hydrogen evolution reaction

Fabrication of a Robust PEM Water Electrolyzer Based on Non-Noble Metal Cathode Catalyst: [Mo3 S13 ]2- Clusters Anchored to N-Doped Carbon Nanotubes

Enhanced Local Ion Transport in High-Performance Anion Exchange Membrane Water Electrolyzers Via Quaternary Ammonium-Functionalized Metal-Organic Framework Electrocatalysts

Hierarchical Crystalline/Amorphous Heterostructure MoNi/NiMoOx for Electrochemical Hydrogen Evolution with Industry‐Level Activity and Stability

Strongly Coupled 3D N-Doped MoO 2 /Ni 3 S 2 Hybrid for High Current Density Hydrogen Evolution Electrocatalysis and Biomass Upgrading.

High‐Performance Alkaline Freshwater and Seawater Hydrogen Catalysis by Sword‐Head Structured Mo2N‐Ni3Mo3N Tunable Interstitial Compound Electrocatalysts

Interfacial engineering of atomic platinum-doped molybdenum carbide quantum dots for high-rate and stable hydrogen evolution reaction in proton exchange membrane water electrolysis

3D Transition Metal Boride Monolithic Electrode for Industrial Hectoampere-Level Current Anion Exchange Membrane Water Electrolysis

In situ rapid and deep self-reconstruction of Fe-doped hydrate NiMoO4 for stable water oxidation at high current densities

Unique hybrid Ni 2 P/MoO 2 @MoS 2 nanomaterials as bifunctional non-noble-metal electro-catalysts for water splitting.

A Universal Process: Self-Templated and Orientated Fabrication of XMoO 4 (X: Ni, Co, or Fe) Nanosheets on MoO 2 Nanoplates as Electrocatalysts for Efficient Water Splitting

NiMo-MOF-Derived Carbon-Armored Ni4Mo Alloy of an Interwoven Nanosheet Structure as an Outstanding pH-Universal Catalyst for Hydrogen Evolution Reaction at High Current Densities.

Increased Nucleation Sites in Nickel Foam for the Synthesis of MoP@Ni3P/NF Nanosheets for Bifunctional Water Splitting

Modulating electronic structure of support for boosting H 2 generation in alkaline medium

Exceptional alkaline hydrogen evolution by molybdenum-oxide-nitride-based electrocatalysts with fast water-dissociation and hydrogen-adsorption kinetics