Abstract:A relatively simple option of calibrating a fluctuation measurement channel by processing a series of pulses from ionization fission chambers obtained using a low-intensity neutron source is substantiated. The fluctuation channel for measuring the pulse counting rate is an integral part of the ITER Divertor Neutron Flux Monitor, a neutron diagnostics measurement system. The fluctuation measurement method is widely used in control systems for nuclear reactors and has also been repeatedly applied in measuring neutron fluxes at fusion installations with a large neutron yield, TFTR, JET, and JT-60U. The method is based on measuring the dispersion of the signal generated at the output of the signal amplifier of ionization fission chambers. The theoretical basis of the method is Campbell's second theorem. Regarding the application of the theorem to ionization fission chambers, the signal dispersion is proportional to the repetition rate (counting rate) of the neutron detector pulses, which, in turn, is proportional to the neutron flux. The method is also referred as MSV, which is an abbreviation for mean square value. Calibration of the fluctuation channel consists in determining the proportionality coefficient, which relates the actually measured signal dispersion of the ionization fission chamber and the desired value of the pulse counting rate. The proportionality coefficient depends both on the characteristics of the detector (amplitude distribution of current pulses, collection time, electrical capacitance) and on the parameters of the fluctuation channel measurement system (bandwidth, quality of cable communication lines, amplifiers, filters, etc.). Under the conditions of a real physical experiment, calibration requires an analytical and experimental study of two components of neutron detector signals: the distribution of squared pulse amplitudes to determine the mean square of the amplitude and the type of function describing the "averaged" shape of the signals. The correctness of calculations and estimates is verified using the output values of the reference measurement channel (usually this is a channel for measuring the pulse counting rate). To implement calibration, measurements using intense sources of neutron radiation should be carried out. The feasibility of calibrating a fluctuation measurement channel by recording and processing a series of fission chamber signals from a low-intensity neutron source is substantiated. Analytical expressions are derived for calculating the calibration coefficient of the fluctuation measurement channel. An experimental verification of the method was carried out in measurements of the neutron flux from a neutron generator with an output of 10 11 neutron/s. The possibility of calibrating the fluctuation measurement channel of neutron plasma diagnostics at the ITER site using low-intensity neutron sources is discussed.

On the Feasibility of Calibrating the Fluctuation Channel for Neutron Diagnostics of Plasma

Microwave Diagnostics System in the HL-2A Tokamak

Measurements of ITER Fusion Power by Neutron Flux Monitors

Data Acquisition System Prototype of the ITER Diagnostic Divertor Neutron Flux Monitor Testing at Research Nuclear Facilities

A Neutron Spectrometry for Fusion Plasmas

Generic approach to assess the measuring performance of total-radiated power quantities by multi-channel resistive bolometer diagnostics on fusion experiments

Monitoring for Actinide Neutron Emissions From Spent Nuclear Fuel Under Extreme Gamma Fields Using Centrifugally Tensioned Metastable Fluid Detector Sensor Technology

Measurement and modelling signals from an optical fission chambers during reactor irradiation

Calculating the Pulse-Height Spectra of ITER Vertical Neutron Camera Diamond Detectors with Regard to the Plasma Ion Distribution Function

Neutron Emission Spectrometer To Measure Ion Temperature On The Fusion Demonstration Plant

Application of High Precision Wavelength Calibration Method for Plasmas Rotation Measurement Based on Fabry-Pérot Etalon on Experimental Advanced Superconducting Tokamak.

Characterization of diamond and organic scintillation detectors utilizing radiation sources for continuous plasma operation

An express monitoring procedure for low pressure MWPC efficiency value in heavy ion induced complete fusion nuclear reactions

Neutronics simulations for the design of neutron flux monitors in SPARC

Development of a Wide-Range Neutron Flux Monitoring System in EAST

Validation of Thin-foil proton recoil neutron spectrometer prototype for application in high yield DT fusion devices

Measuring Impurity Concentration in Near Wall Plasma During Tests of Prototypes of the First Wall of Fusion Reactor in PLM Facility

Calibration of Neutron Counters at the Globus-M2 Tokamak

Nuclear diagnostics for Inertial Confinement Fusion (ICF) plasmas

Superconductor based, tomographic, neutron diagnostics for fusion power monitoring

Beam monitor chamber calibration of a synchro-cyclotron high dose rate per pulse pulsed scanned proton beam