Abstract:The mechanical properties of nickel-based single crystal superalloys deteriorate with increasing misorientation, thus the finished product rate of the casting of single crystal turbine airfoils may be reduced due to the formation of grain boundaries especially when the misorientation angle exceeds to some extent. To this day, evolution of the microstructures at the grain boundaries with misorientation and the relationship between the microstructures and the mechanical properties are still unclear. In this work a detailed characterization of the misorientation related microstructure at the grain boundary in DD6 single crystal superalloy has been carried out using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques; the elemental distribution at the grain boundaries has been analyzed by energy dispersive (EDS) X-ray mapping; and the effect of precipitation of μ phases at the grain boundary on the mechanical property has been evaluated by finite element calculation. It is shown that the proportion of γ phase at the grain boundaries decreases, while the proportion of γ′ phase at the grain boundaries increases with increasing misorientation; the μ phase is precipitated at the grain boundaries when the misorientation angle exceeds about 10° and thus it could lead to a dramatic deterioration of the mechanical properties, as well as that the enrichment of Re and W gradually disappears as the misorientation angle increases. All these factors may result in the degradation of the mechanical properties at the grain boundaries as the misorientation increases. Furthermore, the finite element calculation confirms that precipitation of μ phases at the grain boundary is responsible for the significant deterioration of the mechanical properties when the misorientation exceeds about 10°. This work provides a physical imaging of the microstructure for understanding the relationship between the mechanical properties and the misorientation of the grain boundaries in the single crystal superalloy. Based on our study we hope that we can offer some scientific basis for further improvement of the nickel-based single crystal superalloys.

Temperature dependence of electrochemical characteristics on the growth surface and isomorphous perpendicular surface of DD6

Anodic Dissolution Behavior of DD6 Nickel-Based Single Crystal Superalloy for Electrochemical Machining Applications

Influences of MCrAlY Coatings and TBCs on Oxidation Behavior of a Ni-Based Single Crystal Superalloy

Electrochemical Corrosion Behavior in Sulfuric Acid Solution and Dry Sliding Friction and Wear Properties of Laser-Cladded CoCrFeNiNb High Entropy Alloy Coatings

Optimizing the surface quality of electrochemical machined Ni-based single crystal superalloy via manipulation of phase and dendrite dissolution

Surface morphology and electrochemical behaviour of Ti-48Al-2Cr-2Nb alloy in low-concentration salt solution

Effects of processing parameters on the surface quality of wrought Ni-based superalloy by ultrasonic-assisted electrochemical grinding

Electrochemical dissolution behavior of 07Cr16Ni6 alloy in sodium nitrate solution

Effect of Anodic Behavior on Electrochemical Machining of TB6 Titanium Alloy

Microstructural Evolution and Compositional Homogenization of a Low Re-bearing Ni-based Single Crystal Superalloy During Through Progression of Heat Treatment

Electrochemical Behaviors of Ni-Base Superalloy CMSX-4 in 3.5 wt.% NaCl: Effect of Temperature and Preoxidation

Study of Gamma/Gamma ' Interfacial Width in A Nickel-Based Superalloy by Scanning Transmission Electron Microscopy

Anodic dissolution behavior of the complex microstructure of laser directed energy deposited Alloy 718 during electrolyte jet machining in NaCl-ethylene glycol electrolyte

Electrochemical dissolution behavior of stainless steels with different metallographic phases and its effects on micro electrochemical machining performance

Precipitation and Growth Simulation of Γ′ Phase in Single Crystal Superalloy DD6 with Multiphase-Field Method and Explicit Nucleation Algorithm

Quantitative Study of the Microstructure Evolution along the Thickness Direction in the Nickel-Based Single Crystal Superalloy DD6 at 1323 K Thermal Exposure

Distinction in electrochemical behaviour of Ti6Al4V alloy produced by direct energy deposition and forging

Degradation and Dislocation Evolution of the Nickel-Based Single Crystal Superalloy DD6 under the Coupling High-Speed Rotating and High Temperature Environments

Study on milling material removal mechanism and surface integrity of nickel-based single crystal superalloy DD5

Electrochemical surface modification of GH4742 nickel-based superalloy in C6H5Na3O7 solution

Misorientation Related Microstructure at the Grain Boundary in A Nickel-Based Single Crystal Superalloy