Abstract:Stiffeners play a vital role in strengthening thin panels in a wide range of engineering constructions by reducing additional structural weight. However, these structures are vulnerable to issues such as interlayer delamination or skin-stiffener interfacial debonding due to high stress levels developed from external environmental conditions and operational loadings. In contrast, ultrasonic-guided wave (UGW) techniques exhibit an efficient and precise approach for monitoring discontinuities or damages in composite structures. There is a lack of research on understanding the characteristics of the interaction between UGW and interfacial debonding when in-plane edge loading and environmental factors are simultaneously taken into account. Therefore, this study is motivated by the need to develop a multiphysics numerical model which employs a commercially available finite element software, COMSOL Multiphysics®, to simulate UGW propagation in a stiffened composite plate with debonding at the plate-stiffener interface through a piezoelectric transducer under the combined influence of in-plane edge load and hygrothermal environment. The stiffened plate and piezoelectric patches are modelled with the tetrahedral element, and the bottom surface of the attached stiffener has a through-width 0.1 mm deep groove simulated for debonding. The developed FE model is validated against the results of the conducted experiments and those found in the available literature through the correlation coefficient. Further, the study conducts a comprehensive parametric investigation on stiffened cross-ply (0/90/0) laminated plates, considering variations in debonding size, in-plane load, and hygrothermal load intensity through the excitation of A0 mode. The acquired response is processed to compare the peak amplitude of various modes and energy of the waveform. Additionally, statistical indices such as normalised correlation moment (NCM) and variance of the continuous wavelet transform (CWT) peak are estimated to understand the impact of various parameters on waveform. The results show that the presence of a 90° lamina in the cross-ply laminate generates a low amplitude S0 mode in the scattered response. Moreover, a mode conversion from A0 to S0 mode is observed due to perfect bonding between the plate and the stiffener, providing insights into the bonding state in the panel. Furthermore, it is found that the magnitude of the in-plane loading marginally affects the peak amplitude of various modes in the scattered response. Additionally, when temperature intensity rises, the energy and amplitude of the UGW signals acquired through piezoelectric patches positioned in a direct line with the actuator gradually increase. The NCM value enhances with debonding regardless of exposed hygrothermal condition and reduces with increasing temperature intensity. In addition, the variance of the CWT peak reduces with debonding. The findings of this research are expected to be helpful for the development of efficient algorithms for detecting damages for structural health monitoring of stiffened composite panels.

The effect of temperature on guided wave signal characteristics in presence of disbond and delamination for health monitoring of a honeycomb composite sandwich structure with built-in PZT network

The temperature effects on embedded PZT signals in structural health monitoring for composite structures with different thicknesses

A Waveform Clustering Method for Damage Mode Identification for Composite Laminates under Hygrothermal Environment

Classification of Various Types of Damages in Honeycomb Composite Sandwich Structures using Guided Wave Structural Health Monitoring

Non-destructive evaluation of a composite honeycomb sandwich panel with in-plane waviness damage using ultrasonic guided waves

The effect of low temperatures on monitoring structural health using acoustic-ultrasonic piezoelectric transducers on composite structures.

Guided Ultrasonic Wave Monitoring of Damage in Anisotropic Composites

Effects of high-amplitude low-frequency structural vibrations and machinery sound waves on ultrasonic guided wave propagation for health monitoring of composite aircraft primary structures

Adaptive Modal Identification of Honeycomb Thin-Walled Composite Structures with Pit Defects under Thermal Modal Testing Using Variational Mode Decomposition Technique Based on Digital Image Correlation

Temperature affected guided wave propagation in a composite plate complementing the Open Guided Waves Platform

Influence of Composite Thickness on Ultrasonic Guided Wave Propagation for Damage Detection

Interaction of ultrasonic guided waves with interfacial debonding in a stiffened composite plate under variable temperature and operational conditions

Experimental Investigation of Impact of Environmental Temperature and Optimal Baseline for Thermal Attenuation in Structural Health Monitoring Based on Ultrasonic Guided Waves

Guided Wave Generation And Propagation In Self-Sensing Piezoelectric Composite Plates For Structural Health Monitoring

Dispersion of Lamb waves in a honeycomb composite sandwich panel

Damage detection in large composite stiffened panels based on a novel SHM building block philosophy

Ultrasonic Guided Wave Health Monitoring of High-Temperature Aircraft Structures Based on Variational Mode Decomposition and Fuzzy Entropy

Delamination Detection of Composite Plates Using Piezoceramic Patches and Wavelet Packet Analysis

Optimization of ultrasonic guided wave inspection in structural health monitoring based on thermal sensitivity evaluation

Wave Propagation in Aluminum Honeycomb Plate and Debonding Detection Using Scanning Laser Vibrometer.

Research on guided wave propagation characteristics of quartz ceramic thermal protection structure for ablation monitoring