Abstract:The current study proposed a novel crescent-dimpled film cooling hole and investigated its aerothermal performance on the turbine endwall when a row of the film holes are arranged in front of the stator. The mainstream Reynolds number based on the inlet velocity and the axial chord length of the vane was 150,000, and the blowing ratio ranged from 0.5 to 1.5. Besides, a hybrid configuration combining the advantages of the cylindrical and crescent-dimpled holes was also investigated. RANS simulations using Shear Stress Transport (SST) k - omega turbulence model were conducted. The numerical simulations show that the pure crescent-dimpled hole design enhances the adiabatic film cooling effectiveness by 32.3 %, 52.3 %, and 43.6 % at blowing ratios of 0.5, 1.0, and 1.5, respectively. Correspondingly, the net heat flux reduction (NHFR) values are 22.9 %, 57.9 %, and 63 % higher than the cylindrical holes. The high film cooling effectiveness behind the film cooling hole prevents the additional thermal load caused by the dimple-induced heat transfer enhancement. Using cylindrical holes near the leading edge and crescent-dimpled holes elsewhere, the hybrid arrangement suppresses the passage vortex and further enhances the film cooling effectiveness and NHFR by 51.9 % and 93.8 % at BR = 1.5, respectively. The streamlines and vortex structures show that the crescent dimple at the hole's exit diffuses the coolant, thereby enhancing the film cooling in the lateral direction. Flow separation occurs behind the dimple, which reduces the jet momentum and attracts the jet towards the wall. The curved surface of the dimple directs the horseshoe vortex in front of the jet to the side, and anti-CRVP is formed. These are responsible for the film cooling enhancement by the crescent dimple.

Experimental and computational investigations of the influence of elliptical and square-shaped dimples on performance of NACA 6409 blade profile

Dimple Shape Effect on the Aerodynamic Performance of H-Rotor Darrieus Vertical Axis Wind Turbine

Impact of Blade Modifications on the Performance of a Darrieus Wind Turbine

Passive flow-field control using dimples for improved aerodynamic flow over a wing

Aerodynamic performance and starting torque enhancement of small-scale Darrieus type straight-bladed vertical axis wind turbines with J-shaped airfoil

Numerical and Experimental Study on Performance Enhancement of Darrieus Vertical Axis Wind Turbine With Wingtip Devices

An Experimental Investigation on the Flow Characteristics Over Dimple Arrays Pertinent to Internal Cooling of Turbine Blades

Power Optimization of NACA 0018 Airfoil Blade of Horizontal Axis Wind Turbine by CFD Analysis

Improved Design For Horizontal Axis Wind Turbine Blades With Winglets

Numerical Studies On Improving Performance Of Rotor-67 By Blended Blade And Endwall Technique

Performance Improvement of a Straight-Bladed Darrieus Hydrokinetic Turbine through Enhanced Winglet Designs

NUMERICAL INVESTIGATION OF THE BLADE PROFILE EFFECT ON THE AERODYNAMIC PERFORMANCE OF A VERTICAL-AXIS WIND TURBINE DARRIEUS H-ROTOR

Numerical investigation on the spanwise chord distribution effects on the performance of an H-darrieus vertical axis wind turbines

Influence of Dimple Diameter and Depth on Heat Transfer of Impingement-Cooled Turbine Leading Edge with Cross-Flow and Dimple

Blade thickness effect on the aerodynamic performance of an asymmetric NACA six series blade vertical axis wind turbine in low wind speed

Aerodynamic Study of Leading-Edge Protuberance to Improve the Performance of NACA 0009 Blade

Flow Dynamics and Performance Enhancement of Drag-Type Savonius Wind Turbine with a Novel Elliptic-Shaped Deflector

Performance Enhancement of Horizontal Axis Wind Turbine Using Numerical Techniques

Enhanced Turbine Endwall Cooling Using Crescent-Dimpled Film Cooling Holes and a Hybrid Configuration: Numerical Study

Theoretical and computational studies on the optimal positions of NACA airfoils used in horizontal axis wind turbine blades

Numerical study of the effect of surface grooves on the aerodynamic performance of a NACA 4415 airfoil for small wind turbines