Abstract:Turbulators, such as ribs, dimples, and pin-fins, play a vital role in the internal cooling efficiency of turbine blades. As a typical turbulator, various rib configurations using a uniform arrangement scheme have indicated high heat transfer enhancement but the friction loss is simultaneously subject to a great increase. In this work, a novel hierarchical arrangement scheme of ribs is developed aiming to improve the cooling efficiency. Adopting the uniform scheme as a baseline, the hierarchical scheme is implemented for six representative rib configurations (including transverse ribs, angled ribs, V-shaped ribs, inverted V-shaped ribs, M-shaped ribs, and inverted M-shaped ribs) and evaluated for its feasibility and generality. For different cooling designs, turbulent flow and heat transfer of the ribbed cooling channel are studied by three-dimensional numerical simulations based on the finite volume method with a constructed turbulence model. It is found that for all rib configurations, the hierarchical scheme can remarkably reduce the friction loss as desired, especially for the inverted V-shaped rib with a reduction of up to 50%. Due to the occurrence of flow separation, secondary flows offered by transverse ribs are characterized by a two-dimensional recirculation vortex behind the rib. For other rib configurations, secondary flows present a typical three-dimensional characteristic including the downwash flows along the inclined rib leg and the longitudinal vortices. The usage of the hierarchical scheme with small ribs strongly suppresses these secondary flows, which contributes to the significant decrease in form drag loss. Meanwhile, using the hierarchical scheme produces a slight heat transfer deterioration commonly, which is because the constrained secondary vortices weaken the turbulent mixing and convection heat transfer. Significantly, for the two W-shaped ribs, the limited secondary vortices but fully developed under the hierarchical scheme achieve a higher heat transfer enhancement. Finally, for all considered ribs, the hierarchical scheme can improve the overall performance factor of ( Nu / Nu 0 )/( f / f 0 ) 1/3 by more than 10%, and up to 21.15% for the V-shaped rib. Adjusting design variables, including the decreasing ratio of the rib size and the initial rib size, the hierarchical scheme still provides even higher performance enhancement.

Experimental investigation of heat transfer and pressure drop using combination of ribs and dimples

Experimental Study of Heat Transfer and Pressure Loss in Channels with Miniature V Rib-Dimple Hybrid Structure

Heat Transfer Enhancement In A Rectangular Channel With The Combination Of Ribs, Dimples And Protrusions

Numerical Study of Heat Transfer and Flow Structure over Channel Surfaces Featuring Miniature V Rib-Dimples with Various Configurations

Effect of Discrete Ribs on Heat Transfer and Friction Inside Narrow Rectangular Cross Section Cooling Passage of Gas Turbine Blade

Experimental Study on Flow Behavior and Heat Transfer Enhancement With Distinct Dimpled Gas Turbine Blade Internal Cooling Channel

Heat Transfer and Pressure Loss of Turbulent Flow in Channels with Miniature Structured Ribs on One Wall

Experimental Study of Flow and Heat Transfer of High-performance ribs for Internal Cooling of Gas Turbine Blades

Experimental and Numerical Investigation of Heat Transfer Inside Two-Pass Rib Roughened Duct (AR = 1:2) under Rotating and Stationary Conditions

Thermal performance of teardrop pin fins and zig zag ribs in a wedge channel

Numerical Predictions on Fluid Flow and Heat Transfer in U-Shaped Channel with the Combination of Ribs, Dimples and Protrusions under Rotational Effects

A New Cooling Design for Rib Roughened Two-Pass Channel Having Positive Effects of Rotation on Heat Transfer Enhancement on Both Pressure and Suction Side Internal Walls of a Gas Turbine Blade

Enhancement of the Thermohydraulic Performance in a Double Passage Square Duct with the Use of Inclined Ribs of 45°: A Comparative Computational Study

Numerical Study on Flow and Heat Transfer Performance of Rectangular Heat Sink with Compound Heat Transfer Enhancement Structures

Aerothermal Dynamic Characteristics of Array Micro Ribs in Channel Flow

Heat Transfer and Pressure Drop Correlations for Rectangular Channels with Ribs

Flow and heat transfer characteristics of bio-inspired rhombus-patterned ribs: Performance optimization using response surface methodology

Numerical investigation of the flows and heat transfer characteristics of internal cooling channels with separated ribs in gas turbine blades

Evaluation of Heat Transfer Enhancement on Rotational Gas Turbine Blade Internal Cooling Channel with Dimpled Surface

Effect of side-wall ribs on heat transfer and flow characteristics in internal cooling passage of gas turbine blade

Performance evaluation with turbulent flow and heat transfer characteristics in rectangular cooling channels with various novel hierarchical rib schemes