Abstract:In the present work, a single solution treatment as well as solution/aging treatments were employed to regulate the precipitation behavior, martensitic transformation, mechanical and functional properties of EBF3-fabricated NiTi shape memory alloys. Under the optimized post-process heat treatment conditions, i.e., solution treatment at 1000 oC for 10 h followed by subsequent aging treatment at 500 oC for 4 h, the previously existing elongated Ti4Ni2Ox oxides were partially dissolved and interrupted into granular form and relatively uniformly distributed in the NiTi matrix. Meanwhile, the preexisting nanoscale Ni4Ti3 precipitates gradually transformed from clustered or segregated granular to a lenticular shape with the increase of the aging time. The martensite transformation routes also underwent an accompanying alteration, which changed from a one-step (B2-A ↔ B19’-M) to two-step (B2-A → R → B19’-M) transformation. Moreover, Ni4Ti3 precipitated with a coherent relationship of {123} B2-A //{11–20} Ni4Ti3 which increase the material strength by hindering dislocation movement and improve plasticity by providing a transition domain for accommodating deformation at the interface. The superelastic stability and narrow response hysteresis promoted by the presence of the R-phase are affected by residual (100) compound twins martensite in the NiTi matrix and the permanent plastic deformation activated in (011) [001] slip system of the B2-A phase. This deteriorates the superelastic recovery ratio from 83.6 to 57.4%, as observed after 10 loading-unloading cycles. The post-heat treatment regime presented in the current investigation can be used to modulate the material precipitation, phase transformation, as well as the mechanical and functional properties of EBF3-fabricated NiTi alloys. These results allow to extrapolate the potential for carefully selected post-heat treatment scheduled for additively manufacturing NiTi shape memory alloys.

Evolution of passive film behavior on mechanically polished NiTi shape memory alloy during forward martensitic transformation

An in Situ TEM Study of the Size Effect on the Thermally Induced Martensitic Transformation in Nanoscale NiTi Shape Memory Alloy

DSC Analysis of Reverse Martensitic Transformation in Deformed Ti–Ni–Nb Shape Memory Alloy

Martensitic Transformation and Shape Memory Effect of Ti–49at.%Ni Alloys

Phase Transformation Behavior of TiNi Based Shape Memory Alloy Films

An atomistic study of effects of temperature and Ni element on the phase transition and wear behavior of NiTi shape memory alloy

Experimental Investigation on the Mechanical Instability of Superelastic NiTi Shape Memory Alloy

The electrochemical behavior of a Ti50Ni47Fe3 shape memory alloy

Phenomenological Description of Thermomechanical Behavior of Shape Memory Alloy

In Situ Observation on Temperature Dependence of Martensitic Transformation and Plastic Deformation in Superelastic NiTi Shape Memory Alloy

Effect of Material State on the Phase Transformation of NiTi Shape Memory Alloy

Influence of applied stress on shape memory characteristics of Ni50Ti45Cu5 (at.%) alloy subjected to thermomechanical cycling

Electrochemical and surface characterization of a nickel–titanium alloy

Stress induced martensitic transformation in NiTi at elevated temperatures: martensite variant microstructures, recoverable strains and plastic strains

Martensitic transformation induced by cooling NiTi wire under various tensile stresses: martensite variant microstructure, textures, recoverable strains and plastic strains

Martensitic transformation induced by cooling NiTi wire under various tensile stresses: Martensite variant microstructures, textures, recoverable strains and plastic strains

Microstructure Evolution and Corrosion Behavior of Metastable Β Ti-18.4nb-5zr Alloy with Low Modulus after Thermomechanical Treatment

Surface Mechanical Attrition Treatment Induced Phase Transformation Behavior in NiTi Shape Memory Alloy

NiTi shape memory alloys under nanoindentation with different atomic compositions

Microstructural Evolution in NiTi Alloy Subjected to Surface Mechanical Attrition Treatment and Mechanism

Effect of post-heat treatments on the microstructure, martensitic transformation and functional performance of EBF3-fabricated NiTi shape memory alloy