Abstract:A kind of branched block PBI proton exchange membrane (PEM) has a porphyrin ring structure for HT‐PEMFCs application. Uses low‐content porphyrin rings (<1 mol.%) as branched monomers to prepare branched PBI, maintaining a high level of PA doping and retention ability. The membranes achieve high proton conductivity and enhance fuel cell performance through the synergistic effect of phase separation of block structures and porphyrin π−π stacking. This results in a uniform distribution of high‐density helical nanochannels that through‐out the membrane, but present better chemical stability and maintains high levels of PA doping and retention ability. The membrane electrode assembly (MEA) can achieve an H2‐O2 fuel cell peak power density of 1077 mW cm−2 at 180 °C and 357 mW cm−2 at 80 °C without humidification and backpressure. High‐temperature proton‐exchange membrane fuel cells (HT‐PEMFCs) fabricated with phosphoric acid (PA)‐doped polybenzimidazole (PBI) show apparent technical advantages. In practical automotive applications, achieving cold start‐up capability is crucial. In this work, a kind of branched block proton exchange membrane (PEM) based on PBI with a low content of porphyrin ring (<1 mol.%) is reported as a branched monomer. Self‐assembly into high‐density helical nanochannels under the synergistic effect of phase separation and porphyrin π−π stacking, thus the PEM can maintain a high level of PA doping. Specifically, the PA/1.8TCPP‐BrPy‐OPBI membrane shows a proton conductivity of 0.169 and 0.071 S cm−1, as well as an H2‐O2 fuel cell peak power density of 1077 and 357 mW cm−2 at 180 and 80 °C without humidification and backpressure, respectively. The membrane electrode assembly (MEA) can exhibit good fuel cell stability, with a voltage decay rate of only 7.0 μV h−1 at 80 °C. Furthermore, it maintains a peak power density of 93% even after 150 start‐up/shut‐down cycles at 25 °C. This work expands the operating temperature range of conventional PBI membranes between 25 and 200 °C and thus provides a novel strategy for high‐performance PBI‐based HT‐PEMFCs.

New anhydrous proton exchange membranes based on polypyrrolone (PPy) for high-temperature polymer electrolyte fuel cells

HT-PEMs Based on Nitrogen-Heterocycle Decorated Poly (arylene Ether Ketone) with Enhanced Proton Conductivity and Excellent Stability

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Gel-state Polybenzimidazole Proton Exchange Membranes with Flexible Alkyl Sulfonic Acid Side Chains for a Wider Operating Temperature Range (25–240 °C)

Dual cross-linked polymer electrolyte membranes based on poly(aryl ether ketone) and poly(styrene-vinylimidazole-divinylbenzene) for high temperature proton exchange membrane fuel cells

Phosphoric Acid Based Proton Exchange Membranes for High Temperature Proton Exchange Membrane Fuel Cells

Phosphonic Acid Grafted Polybenzimidazoles Containing Pyridine for Stable High-Temperature Proton Exchange Membrane Fuel Cells

Synthesis and Properties of Polysilsesquioxane Functionalized Poly(p‐terphenyl‐co‐N‐methyl‐4‐piperidine) Membrane for High Temperature Proton Exchange Membrane Fuel Cells

High conductivity poly( meta -terphenyl alkylene)s proton exchange membranes for high temperature fuel cell

Novel epoxy-based cross-linked polybenzimidazole for high temperature proton exchange membrane fuel cells

Porphyrin Helical Nanochannel‐Assembled Polybenzimidazole Membranes Doped with Phosphoric Acid for Fuel Cells Operating in a Temperature Range of 25–200 °C

Proton exchange membranes for high temperature proton exchange membrane fuel cells: Challenges and perspectives

Composite Membranes Consisting of Acidic Carboxyl Containing Polyimide and Basic Polybenzimidazole for High Temperature Proton Exchange Membrane Fuel Cells

Polybenzimidazole/cerium dioxide/graphitic carbon nitride nanosheets for high performance and durable high temperature proton exchange membranes

Achieving high power density and excellent durability for high temperature proton exchange membrane fuel cells based on crosslinked branched polybenzimidazole and metal-organic frameworks

Polyethersulfone/polyvinylpyrrolidone/boron nitride composite membranes for high proton conductivity and long-term stability high-temperature proton exchange membrane fuel cells

PAF‐6 Doped with Phosphoric Acid Through Alkaline Nitrogen Atoms Boosting High Temperature Proton Exchange Membranes for High Performance of Fuel Cells

Proton Exchange Membrane from Tetrazole-Based Poly (phthalazinone Ether Sulfone Ketone) for High-Temperature Fuel Cells

Ion-Pair Membrane Based on Imidazolium-Functionalized Poly(pentafluorostyrene) for High-Temperature Proton Exchange Membrane Fuel Cell Application

Fabrication of high performance high-temperature proton exchange membranes through constructing stable cation-rich domain in polybenzimidazole membrane

High-performance polybenzimidazole composite membranes doped with nitrogen-rich porous nanosheets for high-temperature fuel cells