Abstract:Within the framework of the proposed research, emphasis was placed on application of magnetic fields to semiconductor growth systems. Through complementary support by the Air Force and DARPA, we were able to acquire a superconducting magnet which can provide axial magnetic fields of up to 30 kGauss for melt stabilization in the NASA facility for heat pipe based vertical BridgmanStockbarger growth. It was found that axial fields up to 3 kGauss do not affect the growth behavior nor the macro-segregation behavior in the system Ge(Ga). Applied fields are found to significantly alter the radial dopant distribution, which is attributed to alterations in the spatial orientation of convective cells. Increasing the applied magnet field to 30 kGauss is found to have a fundamental effect on dopant segregation. The initial transient segregation behavior is identical with that predicted by Tiller e t al. for diffusion controlled plane front solidification. Within the transient region, the dopant concentration increased by in excess of 600%, a concentration increase which in the magnitude has thus far only been observed in the ASTP experiment conducted in the reduced gravity environment of space. While the apparent achievement of diffusion controlled growth, as indicated by theory, is contingent on the validity of the available database, the experimental results demonstrate that magnetic melt stabilization can be valuable in emulating a limited spectrum of reduced gravity conditions. The experiments also point to the need, in space, for extended equilibration of melts prior to solidification, and alternatively, at the need for force convective mixing in a microgravity environment. . Emphasis was also place on the exploration of the potential of KC-135 flights for preliminary studies of the effects of reduced gravity environment on the wetting behavior of semiconductor systems in growth configuration. The experiments indicated different solidification characteristics; however, it was not possible to obtain quantitative data on wetting. The primary problem consisted of deficiencies of the available hardware. The limited number of experiments conducted does not permit any conclusions on the merits of KC-135 flights for semiconductor processing research. It is established, however, that the effective use of this facility will require acquisition of appropriate hard ware. At professional meetings, presentations were made on the potential of reduced gravity environment of R&D in materials processing. -49https://ntrs.nasa.gov/search.jsp?R=19890004306 2019-11-28T09:08:54+00:00Z

A meta-analysis of semiconductor materials fabricated in microgravity

Microgravity Crystal Formation

Crystallization Kinetics of Hard Spheres in Microgravity in the Coexistence Regime: Interactions Between Growing Crystallites.

Colloidal Hard-Sphere Crystallization Kinetics in Microgravity and Normal Gravity

Large FCC colloidal crystals under microgravity

Heat Flow Control and Segregation in Directional Solidification: Development of an Experimental and Theoretical Basis for Bridgman-Type Growth Experiments in a Microgravity Environment

Growth of In x Ga1- x Sb alloy semiconductor at the International Space Station (ISS) and comparison with terrestrial experiments

Growth of InxGa1−xSb alloy semiconductor at the International Space Station (ISS) and comparison with terrestrial experiments

Microstructure Analysis of Al-7 wt% Si Alloy Solidified on Earth Compared to Similar Experiments in Microgravity

Experimental and numerical investigations on dissolution and recrystallization processes of GaSb/InSb/GaSb under microgravity and terrestrial conditions

Numerical Investigation on the Effects of InSb Geometry on the InGaSb Crystal Growth under Microgravity

Microgravity effects on nonequilibrium melt processing of neodymium titanate: thermophysical properties, atomic structure, glass formation and crystallization

Numerical Investigation of the Effects of Axial Temperature Gradient and Cooling Rate on Ingasb Crystal Growth under Micro-Gravity

Analysis of gravity effects during binary alloy directional solidification by comparison of microgravity and Earth experiments with in situ observation

Synthesis of single metallic crystal in microgravity simulated by static magnetic field

Influence of Solidification Parameters on the Amount of Eutectic and Secondary Arm Spacing of Al–7wt% Si Alloy Solidified under Microgravity

Microgravity studies of solidification patterns in model transparent alloys onboard the International Space Station

Study of the Features of Concentration Inhomogeneities during the On-Ground-Based Processing of the Space Experiment on the Ge(Ga) Crystal Growth

Investigation of directionally solidified InGaSb ternary alloys from Ga and Sb faces of GaSb(111) under prolonged microgravity at the International Space Station

Electromagnetic levitation containerless processing of metallic materials in microgravity: thermophysical properties

Uncertainty analysis and performance evaluation of thermophysical property measurement of liquid Au in microgravity