Abstract:SiC/SiC composites have a promising application prospect in the fields of aero-engine turbine blades and other hot-end components due to their excellent properties. It is difficult to machine SiC/SiC composites by traditional mechanical processing because of the ultra-high hardness and anisotropic character. The routinely laser direct processing in the air produce thermal effect damage, resulting in heat-affected zones and microcracks. Here high-temperature chemical-assisted nanosecond laser processing was investigated to realize one-step in-situ fast etching without causing damage to the structure of SiC/SiC composites. Firstly, the chemical wet etching only occurred in the laser-induced local high-temperature region. There was no additional etching damage to the substrate material in the region where the temperature was relatively low. Secondly, chemical liquid served as a transparent constraint layer, the ablation pressure on the material increased in a liquid confined environment. In comparison with laser direct etching in the air, the exposed fiber was not a needle-like structure and tubular structure but turned into a thin and flat tongue-like structure. The etching behavior of 0° fiber layer, 90° fiber layer, and crossing regions of fibers of different directions at low and high laser intensities were studied. Further, the hardness and friction coefficient of SiC/SiC composites after laser direct etching in the air and high-temperature chemical-assisted laser etching were compared. The chemical elementary composition before and after etching was measured to reveal the oxidized and carbonized characteristics. It was concluded that the action mechanism was the combined result of high-temperature decomposition, laser-induced ablation pressure in the liquid confined region, and local chemical wet etching. The results demonstrate that high-temperature chemical-assisted laser etching has some advantages over traditional laser beam machining and is a potential processing method for SiC/SiC composites.

One-step in-situ low damage etching of SiC/SiC composites by high-temperature chemical-assisted laser processing

Investigation on femtosecond laser combined with dynamic wet etching machining of SiC/SiC

Microstructure evolution and ablation mechanism of SiCf/SiC ceramic matrix composite microgrooves processed by pico-second laser

A novel low-damage and low-abrasive wear processing method of Cf/SiC ceramic matrix composites: Laser-induced ablation-assisted grinding

Mechanism Analysis of Nanosecond Pulse Laser Etching of SiC<sub>p</sub>/Mg Composites

Significant improvement of machinability of C f /SiC composites through matching laser scanning spacing and abrasive belt grain size

Waterjet-guided Laser Processing of SiC/SiC Ceramic Matrix Composites to Obtain High Cleanliness and Low Oxidation Damage Characteristics Surfaces

Investigations on the oxidation behavior and removal mechanism of SiC/SiC composites by multi-pulse femtosecond laser ablation

Mechanism Analysis of Nanosecond Pulse Laser Etching of SiCp/Mg Composites

High speed and low roughness micromachining of silicon carbide by plasma etching aided femtosecond laser processing

Materials removal mechanism of single crystalline SiC with laser-induced periodic surface structures (LIPSS)

Removal mechanism of SiC/SiC composites by underwater femtosecond laser ablation

Subsurface Damage Inhibiting and Synchronous Removal Behavior of Cf/SiC Composites with Laser-Induced Controllable Ablation During Abrasive Belt Grinding

Significant Improvement of Machinability of Cf/SiC Composites Through Matching Laser Scanning Spacing and Abrasive Belt Grain Size

Surface Micromorphology and Nanostructures Evolution in Hybrid Laser Processes of Slicing and Polishing Single Crystal 4H-Sic

Investigation on ultrasonic vibration-assisted femtosecond laser polishing of C/SiC composites

Research Advancement on Laser Etching Technology of Silicon Carbide Ceramic Matrix Composite

Multi-pulse femtosecond laser ablation of SiC/SiC composites: Morphological evolution, oxidation mechanisms and component characterization

Revealing Damage Evolution and Ablation Behavior of SiC/SiC Ceramic Matrix Composites by Picosecond Laser High-Efficiency Ablation

Crystal Cleavage, Periodic Nanostructure And Surface Modification Of Sic Ablated By Femtosecond Laser In Different Media

Process mechanism of ultrafast laser multi-focal-scribing for ultrafine and efficient stealth dicing of SiC wafers