Abstract:<p>Direct Laser Deposition (DLD) opens new ways for the fabrication of tools with intricate designs as well as for dies and molds repairing. However, non-equilibrium, and highly dynamic characteristics of the DLD process, generally result in non-equilibrium microstructures, inhomogeneities across the build height, and unwanted phase transformations. This might lead to non-uniform and highly scattered mechanical properties. This highlights the need for a proper thermal post-processing aimed at achieving application-specific mechanical properties. AISI H13, which is commonly used in hot-forming applications (e.g., die casting tooling, extrusion dies), shows high potential in the rapid manufacturing of the tools by additive manufacturing (AM). In this study, the influence of the as-built microstructure on direct tempering response as well as tempering after austenitization and quenching of DLD H13 tool steel is evaluated. The factors governing hardness and tempering behavior are discussed in detail with the aid of microstructural analysis and isochronal tempering studies. As-built microstructure comprised martensite, inter-cellular/inter-dendritic retained austenite (RA), and solidification carbides. Decomposition of retained austenite by direct tempering of the as-built samples led to a stronger secondary hardening peak and a shift of this peak to higher temperature. Austenitized and quenched samples contained ≤2 vol.% retained austenite. Increasing the austenitization temperature and time led to the dissolution of a larger vol.% of solidification carbides, recovery of the micro-segregation, recrystallization and grain growth. In quenched and tempered parts, hardness increased by increasing austenitization temperature from 1020°C to 1060°C as a result of higher supersaturation of quenched martensite leading to larger vol.% of secondary carbide precipitation. Within the whole technically significant tempering range, highest hardness was achieved by direct tempering of the as-built material.</p>

A Comparative Study on the Laser Surface Melting and Laser Surface Cladding of H13 Tool Steel

Experimental and statistical investigation of the impact of laser process parameters on the mechanical properties of H13 tool steel bulk

Microstructures and Mechanical Properties of H13 Tool Steel Fabricated by Selective Laser Melting

Process-Structure-Property Relationships of AISI H13 Tool Steel Processed with Selective Laser Melting

Assessment of Mechanical Behavior in H13 Tool Steel Synthesized through Electron Beam Melting and Selective Laser Melting Techniques

Additive Manufacturing of AISI H13 Tool Steel with Combinations of Higher Laser Power and Scan Speed: Microstructural and Mechanical Properties Insights

Multi-layer Laser Cladding of 316L/H13+20%WC Composition Coatings on the Surface of H13 Steel

Influence and Application of Laser Parameters on Unit of H13 Steel by Laser Remelting Process

Thermal Stability of Laser-Clad Tool Steel with Fine Tungsten Carbide Particle Addition

Effect of Heat Treatment on Microstructural Evolution, Mechanical Properties and Tribological Properties of H13 Steel Prepared Using Selective Laser Melting

Microstructural and Hardness Behavior of H13 Tool Steel Manufactured by Ultrasound-Assisted Laser-Directed Energy Deposition

Numerical Simulation of Laser Cladding 316L/H13+20% WC Composite Coating on H13 Steel Surface

Tempering behavior of a direct laser deposited hot work tool steel: Influence of quenching on secondary hardening and microstructure

Development of a Periodic Laminate Structure in H13 Steel Using Laser Powder Bed Fusion: Effects of Tempering on Hardness Evolution

Impact Testing of H13 Tool Steel Processed with Use of Selective Laser Melting Technology

Laser surface cladding of stainless steel to substitute environmentally hazardous hard chrome plating

Microstructure and Properties of Laser Surface Melted AISI 316L Stainless Steel

Microstructure, hardness, and tribological performance of D2 tool steel fabricated by laser cladding using pulsed wave and substrate heating

Influence of Laser Polishing on Surface Roughness and Microstructural Properties of the Remelted Surface Boundary Layer of Tool Steel H11

Microstructure and Mechanical Properties of H13 Steel/High-Speed Steel Composites Prepared by Laser Metal Deposition

Geometry Analysis and Microhardness Prediction of Nickel-Based Laser Cladding Layer on the Surface of H13 Steel