Abstract:Perovskite solar cells (PSCs) have emerged as a cost-effective solar technology in the past years. PSCs by three-dimensional hybrid inorganic-organic perovskites exhibited decent power conversion efficiencies (PCEs); however, their stabilities were poor. On the other hand, PSCs by all-inorganic perovskites indeed exhibited good stability, but their PCEs were low. Here, the development of novel all-inorganic perovskites CsPbI2Br:xNd3+, where Pb2+ at the B-site is partially heterovalently substituted by Nd3+, is reported. The CsPbI2Br:xNd3+ thin films possess enlarged crystal sizes, enhanced charge carrier mobilities, and superior crystallinity. Thus, the PSCs by the CsPbI2Br:xNd3+ thin films exhibit more than 20% enhanced PCEs and dramatically boosted stability compared to those based on pristine CsPbI2Br thin films. To further boost the device performance of PSCs, solution-processed 4-lithium styrenesulfonic acid/styrene copolymer (LiSPS) is utilized to passivate the surface defect and suppress surface charge carrier recombination. The PSCs based on the CsPbI2Br:xNd3+/LiSPS bilayer thin film possess reduced charge extraction lifetime and suppressed charge carrier recombination, resulting in 14% enhanced PCEs and significantly boosted stability compared to those without incorporation of the LiSPS interface passivation layer. All these results indicate that we developed a facile way to approach high-performance PSCs by all-inorganic perovskites.

Optimizing the NiO x /Au Interface via Postannealing of the All‐Inorganic CsPbIBr 2 Perovskite Solar Cells for High Efficiency

Reduced Lattice Mismatch at the Interface of Perovskite and LaNiO3 Hole Transport Layers for Highly Efficient P–i–n Perovskite Solar Cells

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Stable and highly efficient all-inorganic CsPbBr3 perovskite solar cells by interface engineering with NiO NCs modification

Improving the stability and scalability of all-inorganic inverted CsPbI2Br perovskite solar cell

High Efficiency and Stability of Inverted Perovskite Solar Cells Using Phenethyl Ammonium Iodide-Modified Interface of NiOx and Perovskite Layers

Self-Assembled Monolayer Suppresses Interfacial Reaction between NiOx and Perovskite for Efficient and Stable Inverted Inorganic Perovskite Solar Cells

NiOx for interface and work function engineering in carbon-based all-inorganic perovskite solar cells

Interface Engineering for All‐Inorganic CsPbIBr 2 Perovskite Solar Cells with Enhanced Power Conversion Efficiency over 11%

Unraveling the Modification Effect at NiOx/perovskite interfaces for Efficient and Stable Inverted Perovskite Solar Cells

Highly stable all-inorganic CsPbBr3 perovskite solar cells based on pulsed laser deposition

Highly stable all-inorganic CsPbBr<sub>3</sub> perovskite solar cells based on pulsed laser deposition

Evaporated Nickel Oxide Films with Slow Annealing and Interface Modification for Perovskite Solar Cells

Efficiency optimization of All-Inorganic perovskite solar cell device using NiO x and ZnO as charge transport layers

Efficient and Stable Perovskite Solar Cells by B-Site Compositional Engineered All-Inorganic Perovskites and Interface Passivation

Cation-size mismatch and interface stabilization for efficient NiOx-based inverted perovskite solar cells with 21.9% efficiency

The effects of interfacial dipole caused by annealing-free Al-doped NiOx in efficient perovskite solar cells

Optimizing the Substrate Pre-Heating and Post-Annealing Temperatures for Fabricating High-Performance Carbon-Based CsPbIBr2 Inorganic Perovskite Solar Cells

High‐performance and Large‐area Inverted Perovskite Solar Cells based on NiOx Films Enabled with A Novel Microstructure‐Control Technology

Boosting interfacial contact for the NiO x -based inverted perovskite solar cells via D-A type semiconductor

PEIE-complexed SnO2 Enabled Low-Temperature Solution Fabrication of High-Performance CsPbI3 All-Inorganic Perovskite Solar Cells