Abstract:Semi-open street roofs protect pedestrians from intense sunshine and rains. Their effects on natural ventilation of urban canopy layers (UCL) are less understood. This paper investigates two idealized urban models consisting of 4(2 × 2) or 16(4 × 4) buildings under a neutral atmospheric condition with parallel (0°) or non-parallel (15°, 30°, 45°) approaching wind. The aspect ratio (building height (H)/street width (W)) is 1 and building width is B = 3H. Computational fluid dynamic (CFD) simulations were first validated by experimental data, confirming that standard k–ε model predicted airflow velocity better than RNG k–ε model, realizable k–ε model and Reynolds stress model. Three ventilation indices were numerically analyzed for ventilation assessment, including flow rates across street roofs and openings to show the mechanisms of air exchange, age of air to display how long external air reaches a place after entering UCL, and purging flow rate to quantify the net UCL ventilation capacity induced by mean flows and turbulence.Five semi-open roof types are studied: Walls being hung above street roofs (coverage ratio λa = 100%) at z = 1.5H, 1.2H, 1.1H (‘Hung1.5H’, ‘Hung1.2H’, ‘Hung1.1H’ types); Walls partly covering street roofs (λa = 80%) at z = H (‘Partly-covered’ type); Walls fully covering street roofs (λa = 100%) at z = H (‘Fully-covered’ type). They basically obtain worse UCL ventilation than open street roof type due to the decreased roof ventilation. ‘Hung1.1H’, ‘Hung1.2H’, ‘Hung1.5H’ types are better designs than ‘Fully-covered’ and ‘Partly-covered’ types. Greater urban size contains larger UCL volume and requires longer time to ventilate. The methodologies and ventilation indices are confirmed effective to quantify UCL ventilation.

Evaluation of ventilation performance of monitor roof in residential area based on simplified estimation and CFD analysis

Numerical simulation of wind pressures on low-rise hip roofed buildings

Building Design Utilizing Natural Ventilation Based on CFD and Ventilation Network Analysis and Its Performance Evaluation by Field Measurement

Construction, validation and testing of a water table for natural ventilation analysis

Predicting integrated thermal and acoustic performance in naturally ventilated high-rise buildings using CFD and FEM simulation

Effect of rain shelter installation on the natural ventilation performance of monitor roofs

Evaluating wind-driven natural ventilation potential for early building design

CFD simulations of natural cross ventilation through an apartment with modified hourly wind information from a meteorological station

Estimation model for natural ventilation by wind force considering wind direction and building orientation for low-rise building in China

Wind-induced ventilation rate of single-sided ventilation in a building with internal partition

Assessment of year-round wind-driven ventilation by an integrated ventilation model

Simulation Study on the Effectiveness of Passive Natural-Ventilated Facade Devices for High-Rise Public Buildings

Design optimization and field demonstration of natural ventilation for high-rise residential buildings

Wind tunnel experiment of ventilation rate and airflow characteristics in natural ventilation induced by wind and buoyancy effects

A model for calculating single-sided natural ventilation rate in an urban residential apartment

Natural ventilation assessment in typical open and semi-open urban environments under various wind directions

Natural cross-ventilation in buildings: Building-scale experiments, numerical simulation and thermal comfort evaluation

SIMULATING NATURALLY VENTILATED BUILDINGS WITH DETAILED CFD- BASED WIND PRESSURE DATABASE

Experimental and CFD study of ventilation performance enhanced by roof window and mechanical ventilation system with different design strategies

Validation of CFD Simulations for Natural Ventilation

Study on the impact of the residential building shape on natural ventilation