Abstract:The MAX phase has attracted much attention due to its unique properties combined with the merits of both metal and ceramic, including the low density, high electrical conductivity and good oxidation resistance, which makes it significant for possible applications in various high temperature or other environments. There is a lot of research work on Ti2AlX (X=C, N). However little research about thermodynamic properties at high pressure is carried out. So we study the structural, mechanical and thermodynamic properties of Ti2AlC and Ti2AlN at various pressures and temperatures. The first-principles calculations based on electronic density-functional theory framework are used to investigate the properties at various pressures. The cut-off energy is 350 eV. Converged results are achieved with 10102 special K-point meshes. The self-consistent convergence of total energy is set to be 5.010-6 eV/atom. According to the calculated structural parameters at various pressures, we can find that the ratios V/V0 (V0 denotes the system volume at 0 GPa) of Ti2AlX are reduced by 20.59% and 18.93%, respectively, so the compressibility of the system is strong. As the internal pressure increases, the curves of V/V0 become gentle. Then we calculate elastic constants at pressures ranging from 0 to 50 GPa in steps of 10 GPa. It is obvious that the Ti2AlX is mechanically stable because all of the elastic constants satisfy the Born stability criteria. The bulk modulus, shear modulus and Young's modulus linearly increase with internal pressure increasing, implying that the pressure can improve the resistance to volume deformation. The ductility and brittleness can be judged according to Pugh's criterion (ratio of bulk modulus to shear modulus B/G), and the brittle nature turns into ductile nature in a pressure range of 40-50 GPa for the Ti2AlX since the value of B/G exceeds 1.75. Finally, we study the thermodynamic properties at various pressures and temperatures based on the quasi-harmonic Debye approximation theory, including the bulk modulus, heat capacity and thermal expansion coefficient. The bulk modulus decreases with temperature increasing but increases with pressure increasing. The heat capacity at constant volume Cv and the heat capacity at constant pressure Cp have the same variation tendency, while Cv obeys the Dulong-Petit limit. It is easy to see that temperature and pressure have opposite influences on heat capacity and the effect of temperature is more significant than that of pressure. The effects of temperature and pressure on linear expansion coefficient mainly occur at low temperature and the effect of pressure is not so considerable when the pressure exceeds 30 GPa. Above all, the effects of temperature and pressure on thermodynamic properties are inverse.

Investigating the elastic, mechanical, and thermal properties of polycrystalline Mo2C under high pressure and high temperature

Hardness And Elastic Moduli Of High Pressure Synthesized Mob2 And Wb2 Compacts

Density functional theory investigation of the phonon instability, thermal equation of state and melting curve of Mo.

Ab Initioand Molecular Dynamics Studies of Solid Β-Hmx: Effects of Hydrostatic Pressure and High Temperature

Experimental study of covalent Cr3C2 with high ionicity: Sound velocities, elasticity, and mechanical properties under high pressure

Synthesis and characterization of polycrystalline Mo2BC ceramic

Synthesis, microstructure, and properties of high purity Mo2TiAlC2 ceramics fabricated by spark plasma sintering

Anisotropy in Elasticity and Physical Properties of Ti2B under High Pressure

Elasticity, mechanical and thermal properties of polycrystalline hafnium carbide and tantalum carbide at high pressure

Mechanical properties and high-pressure behavior of high entropy carbide (Mo, Nb, Ta, V, W)C

Distinct superconducting properties and hydrostatic pressure effects in 2D α- and β-Mo2C crystal sheets

Phase Transition and Vibration Properties of MnCO3 at High Pressure and High-Temperature by Raman Spectroscopy

Structural, Mechanical, and Thermodynamic Properties of Ti2AlX (X = C, N) at High Pressure

Lattice dynamics and thermodynamics of molybdenum from first-principles calculations

Sound Velocities, Elasticity, and Mechanical Properties of Stoichiometric Submicron Polycrystalline δ-MoN at High Pressure

Mechanical and tribological performance of (TiNbTaWMo)C high-entropy ceramics in a wide temperature range

Microstructure, Mechanical and Tribological Properties of High-Entropy Carbide (MoNbTaTiV)C5

Single-phase formation and mechanical properties of (TiZrNbTaMo)C high-entropy ceramics: First-principles prediction and experimental study

Polycrystal model of the mechanical behavior of a Mo-TiC30vol.% metal-ceramic composite using a 3D microstructure map obtained by a dual beam FIB-SEM

Synthesis and compressive behavior of Cr2GeC up to 48GPa

First-principles Study of Structural, Thermodynamic, Elastic, and Magnetic Properties of Cr2GeC under Pressure and Temperature