Abstract:The woods of different species vary widely in the nature and amount of their extractive content with a resultant variation in their sorption characteristics. This is particularly evident in the case of tropical woods, many of which are characterized by high extractive content. The nine species included in this study ranged from 3... 17 percent in extractive content. As determined from their desorption isotherms these species ranged from 20.5... 32.8 percent in fiber saturation point prior to extraction, and from 30.4... 38.0 percent after the removal of extractives with a series of neutral solvents. An analysis of variance showed that the variation in fiber saturation point among these species was reduced by about one-half following extraction in desorption and by approximately 7/8 in adsorption.The results of this study lead to several conclusions.The principal effect of extractives is to depress the sigmoid isotherm in the upper range of relative humidity, typically above 60 ... 70 percent. Isotherms of extracted and unextracted wood coincide very closely at relative humidities below about 60 percent.Based on these nine species, the increase in fiber saturation point resulting from the removal of extractives is greatest for a species with a low initial fiber saturation point and least for a species with a high initial fiber saturation point. Model equations accounted for 68 percent of the increase in desorption and 78 percent of the increase in adsorption. The remaining variance is presumed to be due to differences in chemical composition and physical organization of the skeletal cell wall.By employing the Hailwood-Horrobin model equation in analyzing the data, it was possible to partition the sorbed moisture as monomolecular and polymolecular sorption. The presence of extractives has very little effect on the amount of moisture sorbed as a monolayer on the internal surfaces of the cell wall (Langmuir sorption). In contrast, the sorption of moisture in polymolecular layers is reduced in greatly varying degree consistent with the theory of bulking action whereby the extractive substance within the cell wall precludes moisture from occuping the same space.By means of a regression analysis of monomolecular moisture vs. the constant M (a measure of the availability of bonding sites for sorption) in the Hailwood-Horrobin equation, it is evident that monolayer sorption increases with increased availability of bonding sites in both unextracted and extracted wood. By similar analysis polymolecular sorption also increases with increased surface activity in the case of extracted wood, but this effect is completely masked in the analysis of unextracted wood by the predominant bulking action. Total sorption, dominated by polymolecular sorption, shows similar relationships. Only in the case of essentially extractive-free wood can total sorption be expected to reflect the availability of molecular sorption sites and hence reveal variations in degree of crystallinity, cell wall compactness, or chemical composition to a significant degree.

The Role of Extractives and Wood Anatomy in the Wettability and Free Surface Energy of Hardwoods

The Role of Extractives and Wood Anatomy in the Wettability and Free Surface Energy of Hardwoods

Effect of Extractives on the Equilibrium Moisture Content and Shrinkage of Selected Tropical Wood Species

Response Surface Modeling Equilibrium Moisture Content of High Pressure Treated Paulownia Wood

Effects of the Surface Roughness of Six Wood Species for Furniture Production on the Wettability and Bonding Quality of Coating

Extractives in some tropical woods

Understanding the effect of extractives on the mechanical properties of the waterborne coating on wood surface by nanoindentation 3D mapping

The role of wood extractives in structural hardwood bonding and their influence on different adhesive systems

Improved Water Repellency and Dimensional Stability of Wood via Impregnation with an Epoxidized Linseed Oil and Carnauba Wax Complex Emulsion

Role of extractives on the weathering of tropical and temperate wood species in two above-ground fields: coastal or terrestrial

Comparing Wettability and Surface Free Energy of False Heartwood, Ripe Wood and Sapwood in Beech (Fagus sylvatica L.)

THE RELATIONS BETWEEN NON-STRUCTURAL SUBSTANCES, ANNUAL RINGS WIDTH AND LATEWOOD SHARE IN PINUS SYLVESTRIS L. STEM

Effects of removal of extractives on the chemical composition and mechanical properties of wood

Distribution, properties and formation of some wood extractives

Influences of extractives on the photodegradation of wood

The role of extractives in naturally durable wood species

The effect of wood extractives on the thermal stability of different wood species

Wood Extractives: Main Families, Functional Properties, Fields of Application and Interest of Wood Waste

The effect of extractives on water-vapor sorption by wood

Surface Wettability of Lignin Materials from Supercritical Water Hydrolysis of Wood

Water Permeability and Adhesion Strength of Bio-based Coating Applied on Wood