Abstract:This research has demonstrated that SiO 2 impregnation under high vacuum pressure of − 90 kPa can significantly reduce porosity by almost 10%, and improve the mechanical and viscoelastic properties of spruce wood under dry and saturated states. Characterization methods, such as impact test, DMA, SEM, EDS, porosity and SAXS tests were conducted on non-treated and − 90 kPa treated spruce wood samples under dry, saturated and submerged states to analyze the synergistic effect of high vacuum SiO 2 impregnation pressure on wood properties. The results showed that high vacuum impregnation pressure had a significant positive reinforcing effect on wood's properties. It increased the impact resistance of wood under dry and saturated conditions. Additionally, the high vacuum impregnation technique was able to overcome the water-induced softening effect and caused a significant increase in the storage modulus through uniform dispersion of the SiO 2 particles in the wood's vascular structure. Consequently, the impregnation reinforced the wood and ameliorated its capacity to absorb energy. High vacuum impregnation was also able to counteract the plasticizing effect of the water molecules and significantly increased the loss modulus by increasing the internal friction and cohesion of the wood components with the addition of the nanoparticles to the vascular system, which increased the wood's capacity to transform and dissipate energy. Quantitatively and qualitatively, impregnation under a vacuum pressure of − 90 kPa exhibited an effective obstruction of the vascular structure of spruce wood. In all conditions, high vacuum-impregnated samples showed significant enhancements over non-treated samples. This research demonstrated that high vacuum SiO 2 impregnation is an effective wood processing technique. Multiple materials and applications could benefit from this research wherein high strain-rate deformations are expected to occur or when simultaneous elastic behaviour of wood and its damping energy is needed. This study could also pave the way for research on the synergistic effect of SiO 2 impregnation and water absorption on the viscoelastic behaviour of wood.

Understanding the effect of extractives on the mechanical properties of the waterborne coating on wood surface by nanoindentation 3D mapping

Measurement of Mechanical Properties of Multilayer Waterborne Coatings on Wood by Nanoindentation

High-pressure Densification and Hydrophobic Coating for Enhancing the Mechanical Properties and Dimensional Stability of Soft Poplar Wood Boards

The study of physico-mechanical properties of SiO2-impregnated wood under dry and saturated conditions

Effects of removal of extractives on the chemical composition and mechanical properties of wood

Effects of the Surface Roughness of Six Wood Species for Furniture Production on the Wettability and Bonding Quality of Coating

Effect of Thermal Modification on the Nano-Mechanical Properties of the Wood Cell Wall and Waterborne Polyacrylic Coating

Interactions of hydrophilic birch wood (Betula pendula Roth) extractives with adhesives for load-bearing timber structures

Improved Water Repellency and Dimensional Stability of Wood via Impregnation with an Epoxidized Linseed Oil and Carnauba Wax Complex Emulsion

Influence of wood extractives on two-component polyurethane adhesive for structural hardwood bonding

The Effect of Antibacterial and Waterproof Coating Prepared From Hexadecyltrimethoxysilane and Nano-Titanium Dioxide on Wood Properties

The effect of moisture on the mechanical response of wood, adhesive and their interphase by means of nanoindentation

Characterization of wood-adhesive bonds in wet conditions by means of nanoindentation and tensile shear strength

Study on the Difference of Superhydrophobic Characteristics of Different Wood Furniture Substrates

A Review on the Effect of Wood Surface Modification on Paint Film Adhesion Properties

Transforming interface properties of wood laminate composites functionalized by adhesive penetration

Unraveling the permeation-enhancing effect of didecyl dimethyl ammonium chloride (DDAC) on poplar wood (Populus cathayana Rehd.)

Large-scale and high-resolution visualization of static mechanical properties of wood-adhesive interphase utilizing nanoindentation mapping

Significance of wood extractives for wood bonding

Water Permeability and Adhesion Strength of Bio-based Coating Applied on Wood

Adhesion-related properties of silver birch (Betula Pendula Roth) wood as affected by hydrophilic extraction