Abstract:The electromechanical co-simulation method was used to simulate and analyze the 6-DOF (degrees of freedom) positioning and micro-vibration isolation functions of the platform in order to analyze the working performances of a contactless positioning and vibration isolation platform which works at space microgravity environment. The working principle of the contactless positioning and vibration isolation platform was introduced. The exciting unit, position measuring unit and acceleration measuring unit of the platform were made up by contactless biaxial actuators, biaxial position sensitive detectors and uniaxial accelerometers according to space symmetry layout scheme. The controller of the platform was designed based on position and acceleration feedback. Then the mechanical system simulation model and the closed-loop control system simulation model based on position and acceleration feedback was established by ADAMS and MATLAB/Simulink, respectively, which together set up the electromechanical co-simulation model of the platform. The positioning and vibration isolation performances of the platform were simulated by the co-simulation model. Results show that the 6-DOF displacement and angular displacement control errors of the platform are less than 10 μm and 2×10−5 rad respectively under small range positioning mode. The suppression efficiencies of the platform for 6-DOF direct sinusoidal disturbances with frequency range of 0.01−1 Hz and 1−100 Hz are 39−73 dB and 19−73 dB, respectively. The relative displacements between the floater and the stator are less than 1 mm during vibration isolation control process under vibration isolation mode.

Research on unbalance torque of the three axis air bearing baesd platform

Auto-balancing system for three-axis air-bearing based platform

Modeling of a Six-Degree-of-freedom Magnetic Levitation Platform Actuated by Noncontact Lorentz Forces

Electromechanical co-simulation analysis for contactless positioning and vibration isolation platform

Balancing Methods on the Three-Axis Air-Bearing Platform

The Analysis and Compensation of Elastic Unbalance Torque of the Three-axis Air-bearing Simulator

Research on elastic deformation compensation system for three axis air bearing platform

The Design Study of Single Plane Vertical Hard Bearing Dynamic Balancing Machine

Levelling Control of an Electro-pneumatic Stabilized Platform Driven by Pneumatic Muscles

The Design of Dynamic Balancing Machine Based on Finite Element Analysis

Dynamic Modeling and Robust Control in Task Space of 4-DOF Parallel Electric Platform with 4TPS-1PS Structure

Dynamic Modeling and Analysis of a 3-DOF Ultra-precision Positioning Stage with Air Bearinga

Unbalance Compensation by Recursive Seeking Unbalance Mass Position in Active Magnetic Bearing-Rotor System

Unbalance Compensation for Active Magnetic Bearing Rotor System Using a Variable Step Size Real-Time Iterative Seeking Algorithm.

Unbalance Identification of Nonlinear Rotor System Based on Holospectrum Analysis

Research on three axis air bearing platform simulation system for small satellite attitude control

Modeling and control system experiment of a novel series three-axis stable platform

Novel Magnetic Suspension Platform with Three Types of Magnetic Bearings for Mass Transfer

Multi-Body Dynamics Modeling and Control for Strapdown Inertially Stabilized Platforms Considering Light Base Support Characteristics

Air bearing platforms for simulation of spacecraft attitude control systems

Three-axis air-bearing based platform for small satellite attitude determination and control simulation