Abstract:By employing an inorganic halide as a nanoscale inorganic barrier covering grain boundaries, key challenges in perovskite technology, including defect passivation and halide segregation are addressed. This barrier impressively enhanced the performance and stability of wide‐bandgap single‐junction perovskite solar cells, with a remarkable fill factor of 84.82% and open‐circuit voltage of 1.305 V, resulting in high efficiencies across various bandgaps: 21.54% for 1.70 eV, 20.45% for 1.77 eV, and 19.22% for 1.82 eV. In addition, monolithic all‐perovskite tandem solar cells with improved stability and efficiency are demonstrated. Wide‐bandgap (WBG) perovskite solar cells (PSCs) play a crucial role in advancing perovskite‐based tandem solar cells. In WBG perovskite films, grain boundary (GB) defects are the main contributors to open‐circuit voltage (VOC) deficits and performance degradation. This report presents an effective strategy for passivating GBs by incorporating an inorganic protective layer and reducing the density of GBs in perovskite films. This is achieved by integrating potassium thiocyanate (KSCN) into I‐Br mixed halide WBG perovskites. It is reported for the first time that the incorporation of KSCN creates band‐shaped barriers along the GBs. In addition, KSCN enlarges the grains of perovskite film. Elemental and structural analyses reveal that these barriers are composed of potassium lead halide. Incorporating KSCN significantly enhances the fill factor and VOC of WBG single‐junction PSCs by reducing trap density. This results in high power conversion efficiencies of 19.22% (bandgap of 1.82 eV), 20.45% (1.78 eV), and 21.54% (1.70 eV) with a C60/bathocuproine electron transport layer, and 18.51% (1.82 eV) with a C60/SnO2. Furthermore, both operational and shelf stabilities are significantly improved due to reduced light‐induced halide segregation. By using inorganic‐halide‐passivated WBG sub‐cells, a monolithic all‐perovskite tandem solar cell with an efficiency of 27.04% is demonstrated.

Boosting Carrier Transport in Quasi‐2D/3D Perovskite Heterojunction for High‐Performance Perovskite/Organic Tandems

High‐Efficiency Quasi‐2D Perovskite Solar Cells Incorporating 2,2′‐biimidazolium Cation

Rational Heterostructure Stacking Enables 23% Wide-Bandgap Perovskite Solar Cells by Side-Reaction Inhibition

Regulating Charge Carrier Recombination in the Interconnecting Layer to Boost the Efficiency and Stability of Monolithic Perovskite/Organic Tandem Solar Cells

Suppressing Phase Segregation in Wide Bandgap Perovskites for Monolithic Perovskite/Organic Tandem Solar Cells with Reduced Voltage Loss

Leveraging Dion–Jacobson Interface Hierarchies for Defect Alleviation in High-Efficiency and Durable Perovskite Solar Cells

Band Alignment Boosts over 17% Efficiency Quasi-2D Perovskite Solar Cells via Bottom-Side Phase Manipulation

Inorganic wide-bandgap perovskite subcells with dipole bridge for all-perovskite tandems

Carrier control in Sn–Pb perovskites via 2D cation engineering for all-perovskite tandem solar cells with improved efficiency and stability

Stabilizing Wide‐Bandgap Perovskite with Nanoscale Inorganic Halide Barriers for Next‐Generation Tandem Technology

Hole-Transporting Low-Dimensional Perovskite for Enhancing Photovoltaic Performance

Stable and Efficient 3D-2D Perovskite-Perovskite Planar Heterojunction Solar Cell without Organic Hole Transport Layer

Quantum Well Growth Management to Smooth the Energy Transfer Pathway for Quasi‐2D Perovskite Solar Cells

Additive engineering for efficient wide-bandgap perovskite solar cells with low open-circuit voltage losses

Zwitterion Reduces Open‐Circuit Voltage Loss in Wide‐Bandgap Perovskite Solar Cells with 22% Efficiency and Its Application in Tandem Devices

Defect engineering in wide-bandgap perovskites for efficient perovskite–silicon tandem solar cells

Heterojunction formed via 3D-to-2D perovskite conversion for photostable wide-bandgap perovskite solar cells

Efficient 1.77 eV-bandgap perovskite and all-perovskite tandem solar cells enabled by long-alkyl phosphonic acid

Reducing Perovskite/C60 Interface Losses via Sequential Interface Engineering for Efficient Perovskite/Silicon Tandem Solar Cell

Organic-inorganic Hybrid Quasi-2D Perovskites Incorporated with Fluorinated Additives for Efficient and Stable Four-Terminal Tandem Solar Cells

Interfacial engineering of a thiophene-based 2D/3D perovskite heterojunction for efficient and stable inverted wide-bandgap perovskite solar cells