Abstract:Clay core-wall of rockfill dam may endure short-term freezing or freeze–thaw cycles owing to negative temperature conditions during winter construction in cold regions, resulting in the degradation of the clay compaction, frost swelling, and cracking performance. The most commonly used insulation cover measures interfere with the continuous construction of clay core-walls, which may shorten the effective time available for construction and delay the dam construction progress. To address this problem, we proposed using the upper layer of the loose-covering clay and the latent heat of phase change materials (PCMs) to control the core-wall temperature. We implemented a numerical model for simulating the anti-freezing performance of the PCM mixed clay (PCM-clay) with loose covering. First, a heat transfer model was established using the finite element software COMSOL, and the effectiveness of the model was verified by comparing it with indoor temperature control test results. Subsequently, numerical models including different construction conditions were established, and the temperature control effect was analyzed under different loose-covering thicknesses, initial soil temperatures, and PCM contents. The results showed that at the design ambient temperature and a 2% PCM content, an effective construction time availability of two consecutive days was maintained under a 20-cm-thick loose covering. In contrast, under the same temperature conditions, but for a 4% PCM content, the effective construction time available under a 5-cm-thick loose covering was 43.1 h. Thus, the use of PCM-clay combined with the upper layer loose covering for temperature control proved feasible and effective. Additionally, by increasing the thickness of the loose covering and the initial temperature of the PCM-clay, the PCM content can be reduced. This provides a theoretical basis and a potential technical solution to maximize the time available for construction and accelerate the construction progress of core-wall rockfill dams.

Thermal resistance capacity model for the cold release characteristics of cemented paste backfill with phase change materials

A New Model of Phase Change Process for Thermal Energy Storage

Experimental and Numerical Investigations of Heat Transfer and Phase Change Characteristics of Cemented Paste Backfill with PCM

STUDY ON CHARGING AND DISCHARGING RATES OF LATENT HEAT THERMAL ENERGY STORAGE SYSTEMS EMPLOYING MULTIPLE PHASE CHANGE MATERIALS

Numerical and experimental studies on the cooling performance of backfill containing phase change materials

Paraffin–CaCl2·6H2O dosage effects on the strength and heat transfer characteristics of cemented tailings backfill

Prediction of Effective Chloride Diffusivity of Cement Paste and Mortar from Microstructural Features

Evaluation of the Potential Use of Form-Stable Phase Change Materials to Improve the Freeze-Thaw Resistance of Concrete

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

The thermal performances of cement-based materials with different types of microencapsulated phase change materials

Effects of curing time and ice-to-water ratio on performance of cemented paste backfill containing ice slag

A novel measurement method of thermal performances for an improved thermal storage concrete with microencapsulated phase change materials

Numerical simulation of the anti-freezing performance of a phase change clay core-wall with loose covering

Experimental Study on Preparation of a Novel Foamed Cement with Paraffin/ Expanded Graphite Composite Phase Change Thermal Energy Storage Material

Experimental investigation of thermal and mechanical characteristics of slag cement mortars with PCM for radiant floors

Validation of a Mathematical Model for Encapsulated Phase Change Material Flat Slabs for Cooling Applications

Simulation of phase change materials in building walls using effective heat capacity model by recent numerical methods

Heat Storage of Paraffin-Based Composite Phase Change Materials and Their Temperature Regulation of Underground Power Cable Systems

Enhanced thermo-mechanical properties of cementitious composites via red mud-based microencapsulated phase change material: Towards energy conservation in building

Numerical Investigations on Heat Release Performance of Phase Change Mixture of Paraffin and Water

A generalized thermal conductivity model of soil-rock mixture based on freezing characteristic curve