Abstract:Ground source heat pump (GSHP) systems can utilize shallow geothermal energy to realize low-carbon buildings. The backfill material used in GSHPs directly affects the heat exchange between the ground heat exchanger and soil. Phase change materials (PCMs) can utilize the phase change process to realize both the storage and release of energy. Applying PCMs to GSHP backfill materials may be beneficial towards improving efficiency and saving energy. In this study, decanoic acid and lauric acid were used as composite PCM and graphite powder was added to enhance thermal conductivity. Expanded perlite was used as absorbent and silica sol was used to shape and encapsulate PCM. A shape-stable phase change material (SSPCM) was prepared for GSHP backfilling. Basic characteristics including thermal conductivity of SSPCMs were assessed and analyzed, and one-dimensional heat transfer experiments were carried out. The results showed that at a decanoic acid to lauric acid mass ratio of 7:3, the phase change temperature of binary organic acids is 19.9 °C, and the latent heat of phase change is 124.03 kJ/kg. At a 60% mass content percentage of PCMs, the amount of added graphite powder was 4%, the thermal conductivity of the SSPCM encapsulated by silica sol was 0.1431 W/(m·K), and the mass loss rate of SSPCM was less than 5% after 25 high and low temperature cycles. Materials with the above parameters have suitable comprehensive properties and can be used as preferred phase change backfill material for GSHP. The thermal conductivity of the backfill material is negatively correlated with the mixing ratio of SSPCM, and positively correlated with water content. At an intermittent ratio of 10:14, after 10 h of heating, the temperature range of the phase change backfill sample was 0.38–7.45 °C lower than that of the original soil backfill sample; after 14 h of cooling, the temperature of the phase change backfill sample was closer to the initial temperature. Therefore, adding SSPCM to the backfill material is beneficial to the long-term intermittent operation of GSHPs.

Paraffin–CaCl2·6H2O dosage effects on the strength and heat transfer characteristics of cemented tailings backfill

Phase Change Materials of Paraffin in H-Bn Porous Scaffolds with Enhanced Thermal Conductivity and Form Stability

Thermal Conductivity of Aerated Concrete (AC) Composites Containing Micro-Encapsulated Phase Change Materials

Thermal Energy Storage Performance of Paraffin-Based Composite Phase Change Materials Filled with Hexagonal Boron Nitride Nanosheets

Experimental and Numerical Investigations of Heat Transfer and Phase Change Characteristics of Cemented Paste Backfill with PCM

Experimental Investigation of the Comprehensive Heat Transfer Performance of PCMs Filled with CMF in a Heat Storage Device

Heat Storage of Paraffin-Based Composite Phase Change Materials and Their Temperature Regulation of Underground Power Cable Systems

A novel composite phase change material with paraffin wax in tailings porous ceramics

Numerical and experimental studies on the cooling performance of backfill containing phase change materials

Development of a Phase Change Backfill Material with High Heat Capacity and High Thermal Conductivity Used for Ground Source Heat Pumps

Paraffin/diatomite composite phase change material incorporated cement-based composite for thermal energy storage

Study on thermal performance of casing‐type mine heat recovery device with phase change materials filling in annular space

Preparation and evaluation of micro-encapsulated thermal control materials for oil well cement slurry

Heat storage characteristics of composite paraffin as phase change material

A Novel Paraffin/graphite PCM Backfill for PHC Energy Pile: Numerical and Experimental Analysis on Thermal Performance

A cost-effective form-stable PCM composite with modified paraffin and expanded perlite for thermal energy storage in concrete

Experimental Study of the Thermal Properties of a Homogeneous Dispersion System of a Paraffin-based Composite Phase Change Materials

A new method for exploiting mine geothermal energy by using functional cemented paste backfill material for phase change heat storage: Design and experimental study

Effects of Phase Change Materials on the Freeze–Thaw Performance of Expansive Soil

Effect of shape-stable phase change materials on heat transfer characteristics of ground source heat pump backfill materials

Thermal Performance of Lauric Acid/Bentonite/Carbon Nanofiber Composite Phase-Change Materials for Heat Storage