Abstract:The paper presents a technique to obtain an electrically-tunable matching between the series and parallel resonant frequencies of a piezoelectric MEMS acoustic transducer to increase the effectiveness of acoustic emission/detection in voltage-mode driving and sensing. The piezoelectric MEMS transducer has been fabricated using the PiezoMUMPs technology, and it operates in a plate flexural mode exploiting a 6 mm × 6 mm doped silicon diaphragm with an aluminum nitride (AlN) piezoelectric layer deposited on top. The piezoelectric layer can be actuated by means of electrodes placed at the edges of the diaphragm above the AlN film. By applying an adjustable bias voltage Vb between two properly-connected electrodes and the doped silicon, the d31 mode in the AlN film has been exploited to electrically induce a planar static compressive or tensile stress in the diaphragm, depending on the sign of Vb, thus shifting its resonant frequency. The working principle has been first validated through an eigenfrequency analysis with an electrically induced prestress by means of 3D finite element modelling in COMSOL Multiphysics®. The first flexural mode of the unstressed diaphragm results at around 5.1 kHz. Then, the piezoelectric MEMS transducer has been experimentally tested in both receiver and transmitter modes. Experimental results have shown that the resonance can be electrically tuned in the range Vb = ±8 V with estimated tuning sensitivities of 8.7 ± 0.5 Hz/V and 7.8 ± 0.9 Hz/V in transmitter and receiver modes, respectively. A matching of the series and parallel resonant frequencies has been experimentally demonstrated in voltage-mode driving and sensing by applying Vb = 0 in transmission and Vb = −1.9 V in receiving, respectively, thereby obtaining the optimal acoustic emission and detection effectiveness at the same operating frequency.

Piezoelectric Speaker And Electroacoustic Transducer

Design of Piezoelectric Resonant Sound Emission Receiver Sensor

Double-film piezoelectric ceramic loudspeaker

A Piezoelectric MEMS Speaker with a Combined Function of a Silent Alarm

Unsealed Piezoelectric MEMS Speaker with Rigid-Flexible Composite Membrane

Piezoelectric microspeaker using novel driving approach and electrode design for frequency range improvement

On the design of piezoelectric mems microspeaker with high fidelity and wide bandwidth

THD Improvement of Piezoelectric MEMS Speakers by Dual Cantilever Units with Well-Designed Resonant Frequencies

PZT MEMS Speaker Integrated with Silicon-Parylene Composite Corrugated Diaphragm

Micro Acoustic Devices Using Piezoelectric Films

Obtaining High SPL Piezoelectric MEMS Speaker via a Rigid-Flexible Vibration Coupling Mechanism

On the design of a two-way piezoelectric MEMS microspeaker based on a multi-shape cantilever array for high-frequency applications

Piezoelectric MEMS Speaker with Rigid-Flexible-Coupling Actuation Layer

Sandwich type piezoelectric composite transducer for efficient heat dissipation

A Piezoelectric Micro-Machined Ultrasonic Transducer Array Based on Flexible Substrate

Fully Printed Piezoelectric Polymer Loudspeakers with Enhanced Acoustic Performance

Piezoelectric MEMS Acoustic Transducer with Electrically-Tunable Resonant Frequency

High-frequency inlaid cylindrical piezoelectric transducer for high-sensitivity acoustics

An integral wavy shaped P(VDF-TrFE) transducer for audio directional system

Two-Way Piezoelectric MEMS Microspeaker with Novel Structure and Electrode Design for Bandwidth Enhancement

High-Frequency Plane Piezoelectric Transducer for High-Sensitivity Acoustics