Abstract:To address the serious acoustic performance deterioration induced by air leakage in the low-frequency range and the asynchronous vibration in electroacoustic transduction structures near the resonant frequency, a novel sealing strategy is proposed that targets one of the most widely reported piezoelectric MEMS speaker designs. This design consists of multiple cantilever beams, in which the air gaps between cantilevers are automatically and selectively filled with liquid polydimethylsiloxane (PDMS) via the capillary effect, followed by curing. In the proof-of-concept demonstration, the sound pressure level (SPL) within the frequency range lower than 100 Hz markedly increased after sealing in an experiment using an IEC ear simulator. Specifically, the SPL is increased by 4.9 dB at 20 Hz for a 40 Vpp driving voltage. Moreover, the deteriorated SPL response near the resonant frequencies of the cantilever beams (18 kHz-19 kHz) caused by their asynchronous vibration induced by the fabrication process nonuniformity also significantly improved, which successfully increased the SPL to approximately 17.5 dB. Moreover, sealed devices feature nearly the same SPL response as the initial counterpart in the frequency band from 100 Hz to 16 kHz and a total harmonic distortion (THD) of 0.728% at 1 kHz for a 40 Vpp driving voltage. Compared with existing sealing methods, the current approach offers easy operation, low damage risk, excellent repeatability/reliability and excellent robustness advantages and provides a promising technical solution for MEMS acoustic devices.

Obtaining High SPL Piezoelectric MEMS Speaker via a Rigid-Flexible Vibration Coupling Mechanism

Unsealed Piezoelectric MEMS Speaker with Rigid-Flexible Composite Membrane

Piezoelectric MEMS Speaker with Rigid-Flexible-Coupling Actuation Layer

Capillary effect-based selective sealing strategy for increasing piezoelectric MEMS speaker performance

A High-Spl Piezoelectric MEMS Loud Speaker Based on Thin Ceramic PZT

On the Design of Piezoelectric MEMS Microspeaker for the Sound Pressure Level Enhancement

A Piezoelectric MEMS Speaker with a Combined Function of a Silent Alarm

On the design of piezoelectric mems microspeaker with high fidelity and wide bandwidth

Using Reverse-Trapezoid Cantilevers and Sealed Back-Chamber to Enhance the Performance of Mems Piezoelectric Microspeaker at Ultra-High Frequencies

PIEZOELECTRIC MEMS MICROSPEAKER WITH SUSPENSION SPRINGS AND DUAL ELECTRODE TO ENHANCE SOUND PRESSURE LEVEL

Optimization of Dual-electrode Ratio and Driving Phase of Piezoelectric MEMS Speakers for Improving Sound Pressure Level

THD Improvement of Piezoelectric MEMS Speakers by Dual Cantilever Units with Well-Designed Resonant Frequencies

On the design of a two-way piezoelectric MEMS microspeaker based on a multi-shape cantilever array for high-frequency applications

A PZT MEMS loudspeaker with a quasi-closed diaphragm

A Piezoelectric Mems Loud Speaker Based On Ceramic Pzt

A Dual-Electrode Mems Speaker Based On Ceramic Pzt With Improved Sound Pressure Level By Phase Tuning

Sound pressure and low frequency enhancement using novel pzt mems microspeaker design

PZT MEMS Speaker Integrated with Silicon-Parylene Composite Corrugated Diaphragm

Performance Optimization of Piezoelectric MEMS Speaker with Cantilever Diaphragm Array

Unclosed Hexagonal Piezoelectric MEMS Hydrophone Based on Rigid-Flexible Composite Membrane

Piezoelectric microspeaker using novel driving approach and electrode design for frequency range improvement