Abstract:Lithium-ion conductors based on halide anion frameworks have garnered significant attention as optimal ceramic conductors for composite cathodes due to their high oxidation stability and deformability. Recently, a cost-effective halide electrolyte, Li 2 ZrCl 6 , has been reported as a promising alternative to rare-metal-based halide solid electrolytes which are not suitable for manufacturing. Despite the economic advantage of using Zr, its ionic conductivity remains relatively low (0.36 mS cm -1 ), which could limit its applicability in high C-rate applications. To enhance the ionic conductivity of Zr-based solid electrolytes, various structural tuning strategies have been employed. However, challenges persist, such as unstable cycling due to the redox reactions of metal ion and the uneconomical aspects of incorporating rare metals like Yttrium, Indium, and Lanthanides. In this study, we propose economical and rational strategies for tuning Li 2 ZrCl 6 to achieve higher ionic conductivity without compromising stability and affordability. By introducing zero-valent dopants, vacancies, we were able to increase the ionic conductivity of the Zr-based solid electrolyte to nearly twice its original value (0.8 mS cm -1 ). Our detailed analysis reveals that the enhanced conductivity and reduced activation energy are primarily due to the activation of local diffusion paths, resulting from the alleviated repulsion between transition metal ions and Lithium ions. Furthermore, we establish the relationship between the Lithium-ion content and Li diffusivity in the Zr-based solid electrolyte, uncovering a new aspect for structural tuning in Zr-based solid electrolytes. Consequently, we optimized the content of Lithium ions and dopants in the solid electrolyte, synthesizing a super-ionic conductive Zr-based solid electrolyte with an impressive ionic conductivity of approximately 1.6 mS cm -1 and highest Zr percentage reported to date. Our findings offer a rational and economical design strategy for developing stable hcp-LZC structures with faster ionic conduction. This breakthrough has the potential to facilitate the widespread adoption of Zr-based solid electrolytes in lithium-ion batteries.

Enhanced ionic conductivity through B-site Zr doping in NaNbO 3 solid electrolytes

Ultrahigh electric breakdown strength, excellent dielectric energy storage density, and improved electrocaloric effect in Pb-free (1-x)Ba(Zr0.15Ti0.85)O3-xNaNbO3 ceramics

Enhanced ionic conductivity in Na3Zr2Si2PO12 NASICON-type solid electrolytes by adding Mg2+-ions

Effect of Nb–Sm Co-Doping on the Ionic Conductivity of Li7La3Zr2O12 Electrolytes

Enhancing ionic conductivity in solid electrolyte by relocating diffusion ions to under-coordination sites

Enhanced Electrical Conductivity of LaNbO4 by A-site Substitution

Pressure-induced negative capacitance and enhanced grain boundary conductivity in nanocrystalline solid electrolyte BaZrO 3

Enhanced Room-Temperature Na+ Ionic Conductivity in Na4.92Y0.92Zr0.08Si4O12

Lithium ionic conductivity and structural studies of NASICON structured Li0.4Sr0.3Zr0.5Ti1.5(PO4)3

Pristine NASICON Electrolyte: A High Ionic Conductivity and Enhanced Dendrite Resistance Through Zirconia (ZrO2) Impurity-free Solid-Electrolyte Design

Pressure-induced Negative Capacitance and Enhanced Grain Boundary Conductivity in Nanocrystalline Solid Electrolyte BaZrO3

A Niobium-Substituted Sodium Superionic Conductor with Conductivity Higher Than 5.5 Ms Cm−1 Prepared by Solution-Assisted Solid-State Reaction Method

Enhanced ionic conductivity of Cu-doped NASICON solid electrolyte for solid-state sodium batteries

Adapting Crystal Structure and Grain Boundaries Through Sm3+ Doping in Na3Zr2Si2PO4 for Boosting Applicability in Sodium Solid-State Batteries.

Enhanced Lithium-Ion Conductivity in a LiZr2(PO4)(3) Solid Electrolyte by Al Doping

Enhanced grain connection and ionic conductivity of Na3.3La0.3Zr1.7Si2PO12 ceramic electrolyte by adding Na2B4O7

Preparation and Electrochemical Properties of Zr-site Substituted Li7La3(Zr2−xMx)O12 (M = Ta, Nb) Solid Electrolytes

Ruthenium doping of NASICON electrolyte augments the performance of solid-state sodium-ion batteries

Structural Tuning Strategy to Improve Ionic Conductivity of Eco, Cost-Effective Zr-Based Halide Solid Electrolyte

Fundamental investigations on the sodium-ion transport properties of mixed polyanion solid-state battery electrolytes

Synthesis of High Na + Ion-Conducting NASICON-Based Electrolytes and Insights from Diffraction and Positron Annihilation Lifetime Spectroscopy Studies