Abstract:<section class="article-section__content"><p>A design study was undertaken of a 100 kW natural gas solid oxide fuel cell (SOFC)/gas turbine (GT) hybrid system to evaluate the impacts of the reforming process under a broad range of SOFC fuel utilizations. An equilibrium reformer model and a one-dimensional SOFC model are employed to perform system study for this hybrid, while balance of plant model is built in Ebsion to simulate the associated performance of GT cycle. Fifty design cases with varied external fuel reforming temperatures are analyzed based on different SOFC fuel utilization levels. With the decrease of reforming temperature, optimal fuel utilization in terms of efficiency shift from 90% with external reforming to 60% with internal reforming. Highest efficiency up to 74% was achieved with internal reforming, but this came with 1275 K cathode inlet air temperature and 1673 K turbine inlet temperature, which no current fuel cell and few GTs can tolerate. High fuel pre-reforming rates provided a higher design flexibility and showed opportunities of efficiency improvement with appropriate thermal integration strategy. And the feasibility of achieving high efficiencies in the hybrid system with thermally integrated external reforming will be explored in our future work.</p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Novelty Statement</h3><p>Both fuel reforming process and fuel utilization could affect the heat and energy balance in the hybrid gas solid oxide fuel cell (SOFC)-gas turbine (GT) system. However, the optimal design condition considering different fuel reforming approaches and SOFC fuel utilization levels was not determined in the literature. In addition, appropriate integration strategies, used to balance the heat and power between the two subsystems (SOFC and GT), are imperative under different fuel reforming approaches and SOFC fuel utilization levels. But, the feasibility of those thermal integration strategies has not been examined in existing studies. This work studied the coupling effects of SOFC fuel utilization and fuel reforming process on system performance of a natural gas hybrid SOFC/GT cycle. Highest efficiency up to 74% was achieved with internal reforming, but this came with 1275 K cathode inlet air temperature and 1673 K turbine inlet temperature, which no current fuel cell and few GTs can tolerate. High fuel pre-reforming rates provided a higher design flexibility and showed opportunities of efficiency improvement with appropriate thermal integration strategy.</p></section>

Numerical modeling of a novel hybrid system composed of tubiform solid oxide fuel cell and segmented annular thermoelectric generator (SOFC/SATEG)

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Performance prediction and manipulation strategy of a hybrid system based on tubular solid oxide fuel cell and annular thermoelectric generator

SOFC-GT Hybrid System Simulation Using a Distributed-Parameter SOFC Model

Numerical Study of a 20-Cell Tubular Segmented-in-series Solid Oxide Fuel Cell

Conceptual Design and Performance Analysis of Sofc/Micro Gas Turbine Hybrid Distributed Energy System

Optimizing Solid Oxide Fuel Cell Performance to Re-evaluate Its Role in the Mobility Sector

Numerical Modeling of a Cogeneration System Based on a Direct Carbon Solid Oxide Fuel Cell and a Thermophotovoltaic Cell

Maximum power density analyses of a novel hybrid system based upon solid oxide fuel cells, vacuum thermionic generators and thermoelectric generators

Dynamic modeling of a NG-fueled SOFC-PEMFC hybrid system coupled with TSA process for fuel cell vehicle

Design and optimization of a solid oxide fuel cell-inverted gas turbine integrated system with zero carbon emission for distributed cogeneration

Coupling effects of fuel reforming process and fuel utilization on the system performance of a natural gas solid oxide fuel cell/gas turbine hybrid system

Two-Stage Thermoelectric Generators for Waste Heat Recovery from Solid Oxide Fuel Cells

Influences of The Type and Thickness of Electrolyte on Solid Oxide Fuel Cell Hybrid System Performance

Computer simulation of a SOFC/GT hybrid system

Thermodynamic analysis of solid oxide fuel cell & reheat and regenerative braysson cycle hybrid system integrated with steam generation

Economic, thermal analysis and optimizing of a novel hybrid fuel cell and two-stage thermoelectric device for waste heat-recovery applications

Part-load, Startup, and Shutdown Strategies of a Solid Oxide Fuel Cell-Gas Turbine Hybrid System

Design and Sensitivity Analysis of a Multistage Solid Oxide Fuel Cell Hybrid System with an Inter-Cooled-recuperated Gas Turbine and Organic Rankine Cycle

Study on Model Evolution Method Based on the Hybrid Modeling Technology with Support Vector Machine for an SOFC-GT System

Dynamic Modeling and Operation Strategy of an NG-fueled SOFC-WGS-TSA-PEMFC Hybrid Energy Conversion System for Fuel Cell Vehicle by Using MATLAB/SIMULINK