Abstract:<section class="article-section__content"><p>A design study was undertaken of a 100 kW natural gas solid oxide fuel cell (SOFC)/gas turbine (GT) hybrid system to evaluate the impacts of the reforming process under a broad range of SOFC fuel utilizations. An equilibrium reformer model and a one-dimensional SOFC model are employed to perform system study for this hybrid, while balance of plant model is built in Ebsion to simulate the associated performance of GT cycle. Fifty design cases with varied external fuel reforming temperatures are analyzed based on different SOFC fuel utilization levels. With the decrease of reforming temperature, optimal fuel utilization in terms of efficiency shift from 90% with external reforming to 60% with internal reforming. Highest efficiency up to 74% was achieved with internal reforming, but this came with 1275 K cathode inlet air temperature and 1673 K turbine inlet temperature, which no current fuel cell and few GTs can tolerate. High fuel pre-reforming rates provided a higher design flexibility and showed opportunities of efficiency improvement with appropriate thermal integration strategy. And the feasibility of achieving high efficiencies in the hybrid system with thermally integrated external reforming will be explored in our future work.</p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Novelty Statement</h3><p>Both fuel reforming process and fuel utilization could affect the heat and energy balance in the hybrid gas solid oxide fuel cell (SOFC)-gas turbine (GT) system. However, the optimal design condition considering different fuel reforming approaches and SOFC fuel utilization levels was not determined in the literature. In addition, appropriate integration strategies, used to balance the heat and power between the two subsystems (SOFC and GT), are imperative under different fuel reforming approaches and SOFC fuel utilization levels. But, the feasibility of those thermal integration strategies has not been examined in existing studies. This work studied the coupling effects of SOFC fuel utilization and fuel reforming process on system performance of a natural gas hybrid SOFC/GT cycle. Highest efficiency up to 74% was achieved with internal reforming, but this came with 1275 K cathode inlet air temperature and 1673 K turbine inlet temperature, which no current fuel cell and few GTs can tolerate. High fuel pre-reforming rates provided a higher design flexibility and showed opportunities of efficiency improvement with appropriate thermal integration strategy.</p></section>

A Novel In-Tube Reformer for Solid Oxide Fuel Cell for Performance Improvement and Efficient Thermal Management: A Numerical Study Based on Artificial Neural Network and Genetic Algorithm

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Numerical Modeling and Current Collection Designs for Flat-Chip Solid Oxide Fuel Cell

Coupling deep learning and multi-objective genetic algorithms to achieve high performance and durability of direct internal reforming solid oxide fuel cell

Numerical Study on the Thermal Characteristics in a Tubular Solid Oxide Fuel Cell with Indirect Internal Reformer

Performance optimization of solid oxide electrolysis cell for syngas production by high temperature co-electrolysis via differential evolution algorithm with practical constraints

Thermal Modeling and Management of Solid Oxide Fuel Cells Operating with Internally Reformed Methane

Numerical study of thermoelectric characteristics of a planar solid oxide fuel cell with direct internal reforming of methane

Numerical Analysis of the Internal Fuel Processing in Solid Oxide Fuel Cells

Numerical Simulation of a Direct Internal Reforming Solid Oxide Fuel Cell Using Computational Fluid Dynamics Method

Coupling effects of fuel reforming process and fuel utilization on the system performance of a natural gas solid oxide fuel cell/gas turbine hybrid system

Numerical investigation of the chemical and electrochemical characteristics of planar solid oxide fuel cell with direct internal reforming

Artificial Intelligence Based Structural Optimization of Solid Oxide Fuel Cell with Three-Dimensional Reticulated Trapezoidal Flow Field

Numerical Simulation of an Internal Reforming Solid Oxide Fuel Cell Unit Fueled with Hydrogen-Natural Gas Mixtures

Numerical multi-physical optimization of operating condition and current collecting setup for large-area solid oxide fuel cells

Part-load Performance Prediction of a Novel Diluted Ammonia-Fueled Solid Oxide Fuel Cell and Engine Combined System with Hydrogen Regeneration Via Data-Driven Model

Improvement of the three-dimensional fine-mesh flow field of proton exchange membrane fuel cell (PEMFC) using CFD modeling, artificial neural network and genetic algorithm

Towards Online Optimisation of Solid Oxide Fuel Cell Performance: Combining Deep Learning with Multi-Physics Simulation

Performance Simulation of Natural Gas Pre-reforming Solid Oxide Fuel Cell

One-dimensional Dynamic Modeling and Simulation of a Planar Direct Internal Reforming Solid Oxide Fuel Cell

Numerical modeling of a novel hybrid system composed of tubiform solid oxide fuel cell and segmented annular thermoelectric generator (SOFC/SATEG)