Abstract:Different heat treatment processes, such as welding and coating, involved in the manufacturing process of DD5 single crystal high-temperature alloy parts were studied through heat process simulation experiments to investigate their potential effects on material structure and mechanical properties. The results showed that after undergoing standard heat treatment, the γ′ phase of DD5 alloy decreased in cubic degree and slightly increased in size. The interface between the matrix γ phase and the reinforcing phase γ′ became non-straight and had a slightly serrated shape. Further coating processes led to further increases in the size of the γ′ phase, and some γ′ phases showed obvious connectivity. The serrated shape morphology of the interface between the γ phase and the γ′ phase disappeared. The influence of welding and coating processes on the tensile properties at high temperatures of 870 °C was relatively small, while the effects on the long-term durability at 1093 °C were significant, with reductions of approximately 17.5% and 33.2% compared to standard heat treatment, respectively. When the heat processes of welding and coating were incorporated into the standard heat treatment process, the size of the γ′ phase also increased, and the cubic degree of the γ′ phase decreased. The interface between the matrix and the reinforcing phase also showed some degree of roughening. The tensile strength of the treated DD5 alloy at 870 °C did not change significantly, while the tensile plasticity slightly increased. The long-term durability at 1093 °C decreased by approximately 40.1% compared to standard heat treatment. The influence of heat processes on the microstructure of DD5 alloy parts during the manufacturing process was analyzed, and the corresponding relationship between the changes in microstructure and phase morphology and high-temperature performance was discussed.

Microstructure and mechanical properties of thixoformed GH4037 parts before and after heat treatment

Microstructure and Mechanical Properties of Nickel-Based Superalloy GH4037 Parts Formed by Thixoforming

Effects of Forming Temperature, Soaking Time and Dwell Time on the Microstructure and Mechanical Properties of Thixoformed Nickel-Based Superalloy Parts

High Temperature Creep Behavior of Thixoformed Nickel-Based Superalloy Parts

Effects of Heating Temperature and Holding Time on Microstructure and Mechanical Properties of Thixoforged A356 Aluminum Alloy Parts

In-situ Study of Microstructure and Mechanical Properties of GH3536 Alloy Manufactured by Selective Laser Melting at 750 °C

Effect of Heat Treatment on Mechanical Properties of Thixoformed 7A09 Aluminum Alloy

Microstructural evolution of GH4079 superalloy during hot deformation and heat treatment

Effects of Heat Treatment on Γ′ Precipitates and Tensile Properties of a Ni-Base Superalloy

Influence of Heat Process on Microstructure and Mechanical Properties of DD5 Single Crystal Superalloy During Manufacturing

Effects of different heat treatment temperatures on the microstructure and mechanical properties of additive manufacturing Ti65 alloys

Effect of Heat Treatment on Alloy GH901 Microstructure and Mechanical Properties

Effect of Heat Treatment on Microstructure and Mechanical Properties of a Selective Laser Melting Processed Ni-Based Superalloy GTD222

EFFECTS OF THERMO-MECHANICAL TREATMENTS ON MICROSTRUCTURE OF Ti-43Al-9V-Y ALLOY

Microstructure and Mechanical Properties of 7075 Aluminum Alloy Parts Formed by Semi-Solid Thixoextrusion

Effect of Heat Treatment on the Mechanical Property and Deformation Mechanism of a Novel Cast Nickel-Based Superalloy

Microstructures and Mechanical Properties of a Newly Developed Austenitic Heat Resistant Steel

Influence of Various Heat Treatments on Microstructures and Mechanical Properties of GH4099 Superalloy Produced by Laser Powder Bed Fusion

Microstructure and high temperature tensile properties of Al–Si–Cu–Mn–Fe alloys prepared by semi-solid thixoforming

Thermal processing behaviour and microstructural evolution of high W and high γ' content extruded nickel-based powder metallurgy superalloy FGH4109

Microstructure evolution and tensile mechanical properties of thixoformed high performance Al-Zn-Mg-Cu alloy