Abstract:In this work, a framework was proposed on the comprehensive assessment of hardness and welding residual stress in Type 316 austenitic stainless steel welded joints. Firstly, an 8-pass butt-welded joint made of Type 316 stainless steel was fabricated. Finite element analyses of the welded joint were performed to investigate hardness and welding residual stress distributions. The grain growth model was developed for the hardness prediction. The Chaboche combined isotropic-kinematic strain hardening model and time-temperature dependent annealing model were adopted. The relationships between the Vickers hardness and the uniaxial plastic strain as well as grain size were collected from published literatures. The simulation results of the grain size and accumulated equivalent plastic strain were used for the hardness prediction of the welded joint. The predicted hardness was compared with the experimental data of hardness mapping. The distribution of welding residual stress on the outer surface of the welded pipe was measured by using the X-ray diffraction method and strain gauge method, respectively. The predicted welding residual stresses were compared with the measurements. The results obtained showed that the developed numerical approach can predict the hardness and welding residual stress of Type 316 stainless steel welded joints with satisfactory accuracy. The effects of heat input, structural constraint, and repair welding on the hardness and welding residual stress will be investigated as further works.

Comprehensive Impact of Machined Surface Integrity on Stress Corrosion Cracking Initiation in 316 Austenitic Stainless Steel

Correlation between machining-induced surface alterations and stress corrosion cracking susceptibility of au stenitic stainless steels

Combined effects of machining-induced residual stress and external load on SCC initiation and early propagation of 316 stainless steel in high temperature high pressure water

Effect of surface nanocrystallization induced by mechanical grinding treatment on stress corrosion cracking behavior of 316 L austenitic stainless steel in boiling MgCl 2 solution

A Three-Dimensional Model of Non-Slipping Stress Corrosion Cracking under Low Loads

Effects of Multi-Pass Turning on Stress Corrosion Cracking of AISI 304 Austenitic Stainless Steel

Effects of Processing Parameters and Tool Geometric Parameters on Residual Stress of Machined 304 Stainless Steel

Analysis of Stress Corrosion Cracking Growth Rate in the Heat-Affected Zone of 316L Based on the Heterogeneity of the Mechanical Properties

Stress Corrosion Cracking at Low Loads: Surface Slip and Crystallographic Analysis

Surface Stress Analysis of Internally Corroded Pipes under External Pressure

Stress Corrosion Cracking Behavior of Cold-Drawn 316 Austenitic Stainless Steels in Simulated Pwr Environment

Modeling of Hardness and Welding Residual Stress in Type 316 Stainless Steel Components for the Assessment of Stress Corrosion Cracking

Investigations on the SCC initiation behavior of cold worked 316 L in high temperature oxygenated water at constant loads

Effect of ultrasonic surface impact on the microstructural characterization and mechanical properties of 316L austenitic stainless steel

Investigations on the SCC initiation behavior of cold worked 316L in high temperature oxygenated water at constant loads

Microstructure, Residual Strain and Stress Corrosion Cracking Behavior in 316L Heat-Affected Zone

Influence of Surface Modifications by Laser Shock Processing on the Acid Chloride Stress Corrosion Cracking Susceptibility of AISI 304 Stainless Steel

Effect of Ultrasonic Impact Treatment on the Stress Corrosion Cracking of 304 Stainless Steel Welded Joints

The Effect of Surface Grinding on the Stress Corrosion Cracking Initiation of 316LN Stainless Steel in 600oc Supercritical CO2

Research status of influence mechanism of surface integrity on fatigue behavior of metal workpieces: a review

Small Fatigue Crack Initiation Mechanisms and Growth Behavior of 304 Stainless Steel at Room Temperature