Abstract:Additive manufacturing has been well established in many sectors, including the medical industry. For load-bearing bone implants, titanium and its alloys, such as Ti6Al4V, are widely used due to their high strength to weight ratio and osseointegrative properties. However, bone resorption and loosening of implants is related to the significantly higher stiffness of dense Ti6Al4V, leading to stress shielding. With the aging of population, there is an increasing need for orthopedic implants with a high success rate and a long implant life span. Besides that the treatment of non-healing segmental bone defects, where the self-repairing properties of bone tissue are not sufficient, is still a challenge. In both fields of application, patient-specific titanium implants combined with functionally graded porosity designed according to locally expected loads unlock new possibilities. Many studies underline the huge potential of the new design freedom to generate open porous structures and more personalized implants with enhanced mechanical properties that also integrate well with surrounding tissues. Integration of functionally graded open porosity into implants allows for the implant to more closely mimic the mechanical properties of human bone and its internal architecture. The results of this work represent the basis for developing complex porous titanium structures with various pore sizes and shapes to tailor structural mechanical properties and biological responses. Therefore, 3D porous structures with various pore sizes and shapes were designed and manufactured in Ti6Al4V using laser powder bed fusion (PBF-LB/M). Based on these structures, the correlation of pore size and shape with cell ingrowth, morphology, metabolic activity, and early markers for bone formation (ALP activity) was investigated in static cell cultures using the osteosarcoma cell line Saos-2. Mechanical properties, such as stiffness and compression strength, were investigated with compression testing. The present study concludes that cell morphology, metabolic activity, and ALP activity are widely independent of pore shape and size within the tested range of 400–700 μm pore size. Furthermore, the mechanical properties of the evaluated structures were in the range of cortical and trabecular bone. This opens the possibility to design mechanical properties with gradient porosity without decisively affecting biological responses.

Structure and mechanical characteristics of titanium fiber material with gradient pore architecture

Preparation, Microstructure and Mechanical Properties of Porous Titanium Sintered by Ti Fibres

Unidirectional titanium fiber-reinforced porous titanium with mechanical properties suitable for load-bearing biomaterials

Fabrication and Characterization of Porous Titanium Based on TPMS Structure

Fractal Research of Pore-Structure in Porous Titanium Fibers

Gelatin freeze casting of biomimetic titanium alloy with anisotropic and gradient pore structure

A Novel Approach to Fabrication of Three-Dimensional Porous Titanium with Controllable Structure

Evaluation of channel-like porous-structured titanium in mechanical properties and osseointegration

Porous titanium materials with entangled wire structure for load-bearing biomedical applications.

Design And Fabrication Of A Novel Porous Titanium Dental Implant With Micro/Nano Surface

Properties of Additive-Manufactured Open Porous Titanium Structures for Patient-Specific Load-Bearing Implants

Porous material based on spongy titanium granules: Structure, mechanical properties, and osseointegration

Effect of Porosity on Compressive Properities of Porous Titanium with Helical Pores Structure

Structural Design and Finite Element Simulation Analysis of Grade 3 Graded Porous Titanium Implant

Methods of Porous Biomedical Material Fabrication

Flexural and compressive mechanical behaviors of the porous titanium materials with entangled wire structure at different sintering conditions for load-bearing biomedical applications.

In-situ formed graded microporous structure in titanium alloys and its effect on the mechanical properties

Osseointegration properties of titanium implants with different pore diameters: experimental study

Microstructural, Mechanical, Corrosion and Cytotoxicity Characterization of Porous Ti-Si Alloys with Pore-Forming Agent

Fabrication and compressive properties of Ti6Al4V implant with honeycomb-like structure for biomedical applications

Designing bioactive porous titanium interfaces to balance mechanical properties and in vitro cells behavior towards increased osseointegration