Abstract:The impact between the flared bow and the wave will cause a serious bow-flared slamming load. Many investigations have been carried out to predict the slamming load that the hull suffers under severe sea states. With the wide use of the hull structure response monitoring system, it will be of great significance to investigate the ship slamming problem if the slamming load can be identified by using the hull structure response monitoring data in the actual navigation environment. This paper integrates the seakeeping method, computational fluid dynamics method and finite element method to systematically simulate the bow-flared slamming pressure and the local structural response of a large container ship. Through comparative analysis of the dynamic response and static response of the bow-flared structure under extreme slamming load, it is found that the dynamic effect of the bow-flared structure is not obvious. Three different static load identification methods are used to identify the simple static load acting on the flared structure of the bow. By comparing the results of different identification methods, it is found that the TRM + L_curve method can realize the most accurate identification of the simple load. Further, the dynamic response process of the bow-flared structure is regarded as a quasi-static process, and the slamming pressure histories acting on the flared region can be identified. In general, the identification results of the bow-flared slamming pressures are in good agreement with the original slamming pressures, which preliminarily verifies the availability of the present method in the indirect monitoring of the bow-flared slamming load of the large container ship.

Experimental study of wet deck slamming for a SWATH in regular waves

Experimental study on the drop test on wet deck slamming for a SWATH segment model

Experimental study of slamming pressure for a trimaran section with different drop heights and heel angles

Numerical analysis of wet-deck slamming characteristics for trimaran section with different main-hull profiles

Experimental free-drop test investigation into wet-deck slamming loads on a generic trimaran section considering the influence of main hull profile

Experimental drop test investigation into cross deck slamming loads on a trimaran

Numerical investigation on the slamming loads of a truncated trimaran hull entering regular waves

Experimental and Numerical Prediction of Slamming Impact Loads Considering Fluid–Structure Interactions

Coupled Computational Fluid Dynamics-Discrete Element Method for Simulating the Interactions Between Ship-Induced Waves and Riprap on Restricted Waterway Banks

Formulations of Hydrodynamic Force in the Transition Stage of the Water Entry of Linear Wedges with Constant and Varying Speeds

Investigation of trimaran slamming under different conditions

Experimental investigation of slamming characteristics of stiffened elastic wedges with different deadrise angles: Part I–Slamming pressure

Investigations of air cushion effect on the slamming load acting on trimaran cross deck during water entry

A CIP-based Numerical Simulation of Wave Interaction with a Fluid-Filled Membrane Submerged Breakwater

Investigation of vessel slamming and fatigue using a full-scale test sequence

Numerical study of slamming and whipping loads in moderate and large regular waves for different forward speeds

SLAM CHARACTERISTICS OF A HIGH-SPEED WAVE PIERCING CATAMARAN IN IRREGULAR WAVES

Experimental investigation of breaking regular waves slamming on offshore wind jacket structure

Research on the bow-flared slamming load identification method of a large container ship

Experimental study on the dynamic response of a 3-D wedge under asymmetric impact

Experimental investigation on the slamming loads of a truncated 3D stern model entering into water