Abstract:The impact between the flared bow and the wave will cause a serious bow-flared slamming load. Many investigations have been carried out to predict the slamming load that the hull suffers under severe sea states. With the wide use of the hull structure response monitoring system, it will be of great significance to investigate the ship slamming problem if the slamming load can be identified by using the hull structure response monitoring data in the actual navigation environment. This paper integrates the seakeeping method, computational fluid dynamics method and finite element method to systematically simulate the bow-flared slamming pressure and the local structural response of a large container ship. Through comparative analysis of the dynamic response and static response of the bow-flared structure under extreme slamming load, it is found that the dynamic effect of the bow-flared structure is not obvious. Three different static load identification methods are used to identify the simple static load acting on the flared structure of the bow. By comparing the results of different identification methods, it is found that the TRM + L_curve method can realize the most accurate identification of the simple load. Further, the dynamic response process of the bow-flared structure is regarded as a quasi-static process, and the slamming pressure histories acting on the flared region can be identified. In general, the identification results of the bow-flared slamming pressures are in good agreement with the original slamming pressures, which preliminarily verifies the availability of the present method in the indirect monitoring of the bow-flared slamming load of the large container ship.

Experimental free-drop test investigation into wet-deck slamming loads on a generic trimaran section considering the influence of main hull profile

Experimental drop test investigation into cross deck slamming loads on a trimaran

Numerical analysis of wet-deck slamming characteristics for trimaran section with different main-hull profiles

Experimental study of slamming pressure for a trimaran section with different drop heights and heel angles

Experimental study on the drop test on wet deck slamming for a SWATH segment model

Investigation of trimaran slamming under different conditions

Investigations of air cushion effect on the slamming load acting on trimaran cross deck during water entry

Numerical investigation on the slamming loads of a truncated trimaran hull entering regular waves

Experimental investigation on the slamming loads of a truncated 3D stern model entering into water

Experimental study of wet deck slamming for a SWATH in regular waves

Formulations of Hydrodynamic Force in the Transition Stage of the Water Entry of Linear Wedges with Constant and Varying Speeds

Numerical study of slamming and whipping loads in moderate and large regular waves for different forward speeds

CFD Prediction of Ship Seakeeping and Slamming Behaviors of a Trimaran in Oblique Regular Waves

Experimental investigation on the air-cushion effect during free fall of a trimaran section using an air escape control method

Experimental and Numerical Prediction of Slamming Impact Loads Considering Fluid–Structure Interactions

Effects of design and fabrication of segmented ship models on test results of wave-induced loads

Research on the bow-flared slamming load identification method of a large container ship

The Effect of Trimming and Sinkage on the Trimaran Resistance Calculation

Experimental and Numerical Investigation on Slamming Mechanism of a Mooring Column-Stabilised Semi-Submersible

Mechanical analysis and interior stiffeners arrangement discussion of a specific ship side collision situation

Experimental numerical and analytical analysis of the penetration of a scaled double-hull tanker side structure