Lead-Free CsCu 2 I 3 Perovskite Nanostructured Networks Gas Sensor for Selective Detection of Trace Nitrogen Dioxide at Room Temperature

Xia Sun,Jie Yang,Zhilin Wu,Gang Meng,Xuezheng Guo,Delin Kuang,Lian Xiong,Weijie Qu,Xiaodong Fang,Xi Yang,Xiaosheng Tang,Yong He
DOI: https://doi.org/10.1109/jsen.2021.3071744
IF: 4.3
2021-07-01
IEEE Sensors Journal
Abstract:The development of low power consumption sensing devices for detecting trace toxic gases is imperative for a wide variety of applications. Recently, hybrid organic–inorganic lead perovskite-based sensors have been fabricated to demonstrate their potential for gas sensing application. However, the poor repeatability and toxicity of lead halide perovskites severely restrict their further practical applications. Here, the lead-free all-inorganic cesium copper iodide (CsCu<sub>2</sub>I<sub>3</sub>) perovskite nanostructured networks are deposited onto interdigital electrodes patterned substrate as the gas sensitive layer via simply spin coating the precursors. The sensor exhibites excellent room temperature NO<sub>2</sub> sensing properties, including ultra-low limit of detection, excellent repeatability, and good selectivity. Dynamic testing displays the good cycling repeatability of the sensor for ppb level NO<sub>2</sub>. The ultra-sensitive NO<sub>2</sub> sensing behavior of the CsCu<sub>2</sub>I<sub>3</sub> nanostructure networks are mainly attributed to the unique nanoneedle clusters network structure and large amount of cation vacancies on the perovskite surface. In conclusion, the high sensitivity and environmentally friendly CsCu<sub>2</sub>I<sub>3</sub> sensor shows great potential for trace indoor pollutants detection and breathe analysis for disease diagnosis.
engineering, electrical & electronic,instruments & instrumentation,physics, applied
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to develop a low - power - consumption, high - sensitivity gas sensor for detecting trace amounts of toxic gases, especially nitrogen oxides (NO_2). Specifically, the researchers focus on developing a lead - free all - inorganic cesium copper iodide (CsCu_2I_3) perovskite nanostructure network sensor, which has an ultra - low detection limit for NO_2 at room temperature, excellent repeatability and good selectivity. ### Background and Problems 1. **Hazards of Nitrogen Oxides**: - Nitrogen oxides (NO_2) are a harmful air pollutant. Long - term exposure to NO_2 at ppb levels may lead to bronchitis, decreased lung function and an increased risk of respiratory infections in children. - The content of NO_2 in exhaled gas is extremely low, but it is considered a potential biomarker for chronic obstructive pulmonary disease (COPD), so an ultra - high - sensitivity ppb - level gas sensor is required for detection. 2. **Limitations of Existing Technologies**: - Common metal - oxide - semiconductor (MOS) - based NO_2 gas sensors can be used for early warning, but they are limited in terms of sensitivity. - Even though some MOS sensors show high sensitivity in ppb - level NO_2 detection, they usually require high temperature or ultraviolet irradiation to promote surface reactions, which will affect the reliability and durability of the sensors. 3. **Application of Perovskite Materials**: - In recent years, lead - halide perovskites have been used in gas - sensing devices because of their sensitive surface properties and high processing flexibility. - However, the chemical instability of organic - inorganic lead - halide perovskites severely limits their practical applications. - Inorganic halide perovskites are regarded as alternative materials because of their higher chemical stability, but the toxicity of lead - based halide perovskites prompts researchers to develop lead - free perovskite materials. ### Solutions 1. **Material Selection**: - In this paper, lead - free all - inorganic cesium copper iodide (CsCu_2I_3) is selected as the gas - sensitive material. - CsCu_2I_3 is non - toxic, has a fast transport mobility, is easy to synthesize and has good stability under environmental conditions, making it an ideal material for gas sensors. 2. **Preparation Method**: - The CsCu_2I_3 nanostructure network is directly grown on the interdigital electrodes (IDEs)/SiO_2/Si substrate by the anti - solvent - assisted crystallization method. - The perovskite crystallization is promoted by spin - coating the precursor solution and dropping methyl acetate at the center of the substrate, and then annealing at 100°C for 1 hour to evaporate the residual solvent and further promote crystallization. 3. **Performance Evaluation**: - The sensor shows an ultrasensitive and reversible response to ppb - level NO_2 at room temperature. - The response time and recovery time of the sensor are 146 seconds and 413 seconds respectively. - The sensor shows good cyclic repeatability at different concentrations of NO_2 (from 20 ppb to 100 ppm). - The selectivity of the sensor for NO_2 is better than that of other interfering gases, such as nitric oxide (NO), methanol, acetic acid, benzene, styrene, isopropanol and toluene. ### Conclusion This research shows that the lead - free all - inorganic CsCu_2I_3 perovskite nanostructure network sensor has high sensitivity and good selectivity for trace NO_2 at room temperature and has broad application potential, especially in indoor pollutant detection and breath analysis.