Abstract:Lithium (Li) metal is regarded as a “Holy Grail” anode for next-generation rechargeable batteries due to its ultrahigh theoretical specific capacity and extremely low redox potential. Lithium metal batteries (LMBs) with high energy density have received extensive research attentions and been considered to be one of the most promising candidates for the post lithium-ion battery era. However, the intrinsic properties of Li metal hinder the practical application of LMBs, including severe safety concern and poor cycling stability. The closely related problems include: (1) The growth of Li dendrites to penetrate the polymer separator and cause a short circuit of cell; (2) the infinite volume expansion and contraction during Li plating and stripping processes to cause the continuous exposure of fresh Li and consumption of electrolyte; (3) the accumulation of electrochemically inert dead Li so as to increase the cell impedance and decease the Coulombic efficiency. Therefore, it is essential to address the above issues in order to achieve the safe and stable Li metal anode. In the past years, some models about the growth of Li dendrites have been proposed, and they can help us understand the dendrite growth mechanisms and guide the direction toward the design of prospective anodes. And some strategies such as anode structural design, solid-state electrolyte, separator decoration, artificial solid-state electrolyte interphase (SEI), additives and so on have been demonstrated to enable an effective suppression or alleviation of the growth of Li dendrites. Herein, we highlight the strategies of functional additives and conformal coating, especially their impacts on the composition and structure of the electrode/electrolyte interface, and thus on the homogenization of the Li-ion flux and formation of the uniform deposition of Li. Small amounts of additives can react with Li to regulate the properties of SEI, or disperse in the electrolyte as an ion transport channel to modulate the distribution of Li-ion flux. The construction of a conformal coating with rich lithiophilic sites on the Li metal anode or current collector can also tailor the Li ion plating behavior, and the binding energy between lithiophilic groups and Li atoms is obtained through calculation to prove the role of lithiophilic sites. In addition, conformal coating of Li metal can also improve its air stability, which is beneficial to the future commercial application of LMBs. Furthermore, the fluorine-rich components and robust inorganic moieties that may be formed based on both the above strategies are discussed, so as to obtain reinforced SEI with low resistance. We aim to illustrate the design ideas based on the recent works in this field and provide inspiration for the future research on Li metal anode.

The effect of removing the native passivation film on the electrochemical performance of lithium metal electrodes

Self-Adaptive and Electric Field-Driven Protective Layer with Anchored Lithium Deposition Enable Stable Lithium Metal Anode

Investigation of Polysulfone Film on High-Performance Anode with Stabilized Electrolyte/electrode Interface for Lithium Batteries

Modulating Lithium Nucleation Behavior Through Ultrathin Interfacial Layer for Superior Lithium Metal Batteries

Interfacial passivation by room-temperature liquid metal enabling stable 5 V-class lithium-metal batteries in commercial carbonate-based electrolyte

Highly stable and robust bi-electrodes interfacial protective films for practical lithium metal batteries

Advancing Anode-Less Lithium Metal Batteries: ZnF2 Modification and In-Situ Structural Regulation for Enhanced Performance

Plating/Stripping Behavior of Actual Lithium Metal Anode

Regulating Li Nucleation and Growth Heterogeneities via Near‐Surface Lithium‐Ion Irrigation for Stable Anode‐Less Lithium Metal Batteries

Improving Li Anode Performance by a Porous 3D Carbon Paper Host with Plasma Assisted Sponge Carbon Coating

In‐Situ Constructing a Mixed‐Conductive Interfacial Protective Layer for Ultra‐Stable Lithium Metal Anodes

Interfacial challenges towards stable Li metal anode

Tailoring the Mechanical and Electrochemical Properties of an Artificial Interphase for High‐Performance Metallic Lithium Anode

Engineering the Li-ion flux and interfacial chemistry toward stable Li metal anode via a simple separator coating

Suppressing Dendrite Growth of a Lithium Metal Anode by Modifying Conventional Polypropylene Separators with a Composite Layer

Homogenous lithium plating/stripping regulation by a mass-producible Zn particles modified Li-metal composite anode

In Situ Surface Film Formed by Solid‐State Anodic Oxidation for Stable Lithium Metal Anodes

Regulating the Interfacial Electric Field for a Stable Lithium Metal Anode

Electrochemical Polishing: An Effective Strategy for Eliminating Li Dendrites

First‐Principles Study on Polymer Electrolyte Interface Engineering for Lithium Metal Anodes

Anode interface modification of lithium metal batteries: Benefiting from functional additives and conformal coatings