Abstract:To achieve stable cycling of high-energy-density and high-voltage anode-free lithium metal batteries, the interfacial stability of both lithium metal anode and high-voltage cathode is demanded. Electrolytes based on ether solvents tend to have excellent compatibility with the lithium metal anode, but due to their low oxidation potential (generally less than 4.0 V vs. Li+/Li), they render high-voltage LiNi0.8Co0.1Mn0.1O2 (NCM811) cathodes unsatisfactory electrochemical performance. Here, an average Coulombic efficiency of 99.4% is realized for lithium metal plating-striping by using an ether-based local high-concentration electrolyte. By further intro-ducing a minute amount of lithium difluoro(oxalate)borate (LiDFOB) additive (0.02 M) into this baseline elec-trolyte, its oxidation stability is increased to 4.3 V without compromising its high Coulombic efficiency towards reversible lithium plating-striping. Consequently, this additive-supported electrolyte enables the high-loading (3.0 mAh cm-2) Cu||NCM811 anode-free cells to achieve high-capacity retention at both room temperature (-95% capacity retention after 50 cycles) and-20 C (-79% capacity retention after 30 cycles). A combination of microscopic and spectroscopic investigations aided by theoretical calculations demonstrate that the LiDFOB additive helps generate a Li3N-and LiF-rich solid electrolyte interphase on the lithium metal anode side, enabling dense and uniform lithium deposition, meanwhile, it also leads to a uniform and compact cathode electrolyte interphase on the high-voltage NCM811 cathode side, mitigating the transition metals dissolution. This work provides a simple and promising strategy for the electrolyte design of high-voltage anode-free batteries.

Highly stable and robust bi-electrodes interfacial protective films for practical lithium metal batteries

A Bifunctional Composite Artificial Solid Electrolyte Interphase for High Stable Solid-State Lithium Batteries

The Synergistic Effect of Lithium Bis(fluorosulfonyl)imide and Lithium Nitrate for High-Performance Lithium Metal Anode

A Li3Bi/LiF interfacial layer enabling highly stable lithium metal anode

Stable Li Metal Anode with Protected Interface for High-Performance Li Metal Batteries

Synchronously Stabilizing the Interphase of Cathode and Anode Enabling Lithium Metal Batteries via Multiple Electrolyte Additives

In-situ constructed polymer/alloy composite with high ionic conductivity as an artificial solid electrolyte interphase to stabilize lithium metal anode

Ultrathin LiF-rich solid electrolyte interphase for stable long-life cycling stabilization of lithium metal anodes

An Additive-Enabled Ether-Based Electrolyte to Realize Stable Cycling of High-Voltage Anode-Free Lithium Metal Batteries

Constructing the polymer molecules to regulate the electrode/electrolyte interface to enhance lithium-metal battery performance.

Cationic Interfacial Layer toward a LiF-Enriched Interphase for Stable Li Metal Batteries

Cooperative stabilization of bi-electrodes with robust interphases for high-voltage lithium-metal batteries

Lithium Zinc/Lithium Iodide Composite Modified Layer toward Highly Stable Lithium Metal Anodes

Modulating Lithium Nucleation Behavior Through Ultrathin Interfacial Layer for Superior Lithium Metal Batteries

Stabilization of Lithium Metal Interfaces by Constructing Composite Artificial Solid Electrolyte Interface with Mesoporous TiO2 and Perfluoropolymers

Design of Robust, Lithiophilic, and Flexible Inorganic‐Polymer Protective Layer by Separator Engineering Enables Dendrite‐Free Lithium Metal Batteries with LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathode

PVDF-HFP/LiF Composite Interfacial Film to Enhance the Stability of Li-Metal Anodes

LiF-Rich Interfaces and HF Elimination Achieved by a Multifunctional Additive Enable High-Performance Li/LiNi0.8Co0.1Mn0.1O2 Batteries.

An artificial layer enables in situ generation of a homogeneous inorganic/organic composite solid electrolyte interphase for stable lithium metal batteries

Liquid metal as an efficient protective layer for lithium metal anodes in all‐solid‐state batteries

A novel cathode interphase formation methodology by preferential adsorption of a borate-based electrolyte additive