Abstract:This article presents a computational reliability analysis of reinforced soil-retaining structures (RSRS) under seismic conditions. The internal stability of RSRS is evaluated using the horizontal slice method (HSM) with modified pseudo-dynamic seismic forces. Two different failure modes of RSRS are identified and their reliability indices are computed using the first-order reliability method (FORM). The critical probabilistic failure surface is identified using a three-tier optimization scheme. Reliability index of the system is computed by considering the modes of failure to be connected in series. The tension mode is found to be the most critical mode of failure. The present study identifies that the wall height (H), shear wave velocity of the soil (Vs), and predominant frequency of the input motion (ω) govern the response of RSRS. Reliability indices depend on a parameter termed as the normalized frequency (ωH/Vs) and their values decrease with an increase in the value of ωH/Vs. Increase in the damping ratio of soil, increases the value of reliability indices, especially for ωH/Vs values, which are close to π/2. The FORM suffers from few critical shortcomings such as linear assumption of limit state surface at the most probable point of failure and its ability to consider only the statistical uncertainties excluding the effect of epistemic uncertainties. This calls for sampling-based numerical techniques such as Monte-Carlo simulation (MCS) which gives more comprehensive understanding of the problem under consideration in a probabilistic framework. Thus, a computationally efficient surrogate-assisted MCS is carried out to validate the present formulation and provide numerical insights by capturing the system dynamics over the entire design domain. Adoption of the efficient surrogate-assisted approach allowed us to quantify the epistemic uncertainty associated with the system using Gaussian white noise (GWN). Subsequently, its effects on the system reliability index and probabilistic behavior of the critical parameters are presented. The numerical results clearly indicate that it is imperative to take into account the probabilistic deviations of the critical performance parameters for RSRS to ensure adequate safety and serviceability under operational condition while quantifying the reliability of such systems.

Simplified estimation of reliability in structures subjected to seismic loads using the demand-capacity ratio format

Machine Learning-based Seismic Fragility Curves for RC Bridge Piers

Methods of Reliability Analysis Based on Serviceability Limited State for Existing Reinforced Concrete Bridges

Effectiveness of CFRP Seismic-Retrofit of Circular RC Bridge Piers under Vehicular Lateral Impact Loading

Improved bridge capacity rating methods based on system reliability assessment

Simplified Approach for Reliability-Based Design Against Basal-Heave Failure in Braced Excavations Considering Spatial Effect

Bridge Rating Using System Reliability Assessment. II: Improvements to Bridge Rating Practices

Fragility Assessment of RC Bridges Exposed to Seismic Loads and Corrosion over Time

Seismic evaluation of reinforced concrete bridges using capacity‐based inelastic displacement spectra

Bridge Rating Using System Reliability Assessment. I: Assessment and Verification by Load Testing

Design of foundation structures of sea-crossing bridges on serviceability limit state

Extreme value distribution and dynamic reliability estimation of high-pier bridges subjected to near-fault impulsive ground motions

Monitoring-Based Fatigue Reliability Assessment of Steel Bridges: Analytical Model and Application

Seismic fragility assessment framework for highway bridges based on an improved uniform design-response surface model methodology

Probabilistic seismic demand assessment accounting for finite element model class uncertainty: Application to a code‐designed URM infilled reinforced concrete frame building

A Simplified Analysis Method for Reinforced Concrete Arch Bridge under Exceptionally Serious Earthquake

Efficient computational system reliability analysis of reinforced soil-retaining structures under seismic conditions including the effect of simulated noise

Method for Probabilistic Evaluation of Seismic Structural Damage

Probabilistic curvature limit states of corroded circular RC bridge columns: Data-driven models and application to lifetime seismic fragility analyses

Fragility Analyses of Bridge Structures Using the Logarithmic Piecewise Function-Based Probabilistic Seismic Demand Model

Reliability Analysis Of Existing Reinforced Concrete Bridges For Serviceability Limit State Of Maximum Crack Width