Abstract:Due to ageing of the bridge stock, continuously increasing load requirements, the need for assessing existing bridges is becoming increasingly important. Reinforced concrete (RC) bridge deck slabs are among the most critical parts to the load carrying capacity of bridges. Previous research indicated that the assessment method used in current practice largely underestimate the load-carrying capacity. The objective of the study reported in this licentiate thesis is to develop and calibrate improved methods for assessment of load-carrying capacity and response of existing bridge deck slabs. This study proposes an enhanced assessment through improved structural analysis and resistance evaluation in order to achieve higher detectable load-carrying capacity. To achieve this objective, the scientific approaches including literature study, laboratory tests, analytical analyses and finite element analyses were adopted. Two major studies and a series with supporting tests were conducted as following: A large test series, in which three specimens containing traditional steel bar reinforcement in ordinary concrete, were carried out to study the load carrying capacity and structural behavior of two-way slab. A proposed multi-level assessment method was validated through two case studies: a two-way slab and a cantilever slab. The multi-level assessment method includes simplified analysis, 3D linear FE analysis, 3D nonlinear analysis with shell elements, 3D nonlinear FE analysis with continuum elements include fully bonded reinforcement as well as 3D nonlinear FE analysis with continuum elements including bond-slip for the reinforcement. To develop the modeling strategies for two-way RC slabs with continuum elements, parameter studies has been carried out to investigate the influence of different modeling choices. Parameters including finite element properties, modeling of concrete, modeling of reinforcement and stiffness of supports were varied in different comparative models to investigate the influence. The study shows that existing methods currently used in assessment are not able to accurately reflect the response of RC bridge deck slabs, and underestimate their capacity. With enhanced assessment methods, such as the nonlinear finite element method, it is possible to better reflect the structural behavior, and more accurately determine the load carrying capacity. Two case studies have proven that the multi-level assessment method is able to reflect the structural behavior at different levels of approximation, which is beneficial in evaluating existing RC slabs. The parameter studies indicate that modeling choices such as geometric nonlinearity, crack bandwidth and Poisson’s ratio have significant impact on determination of the load-carrying capacity. Finite element properties, reinforcement model and stiffness of supports influence crack pattern and load distribution respectively.

Reliability Analysis Of Existing Reinforced Concrete Bridges For Serviceability Limit State Of Maximum Crack Width

Methods of Reliability Analysis Based on Serviceability Limited State for Existing Reinforced Concrete Bridges

Study on Reliability of the Maximum Crack Width for Flexural Members of Reinforced Concrete Bridges

Structural Analysis of Existing RC Bridge Deck Slabs Structural Analysis of Existing RC Bridge Deck Slabs

INCORPORATING PRE-EXISTING CRACKS IN STRUCTURAL ASSESSMENT OF RC STRUCTURES

Repair and Strengthening Assessment of Existing Bridges Based on Time-Dependent Reliability Analysis

Carbonization Reliability Assessment and Lifetime Prediction for Reinforced Concrete Bridges in Cold Area

Prediction of remaining service life of cracking concrete box girder bridges

Experimental Investigation on First Crack Strength and Crack Widthof Reinforced Concrete Beamsby Side-Bonding Cfrp Sheets

Test on Flexural Performance of RC Bridge Member after Overload Reinforced with Externally Bonded FRP

Methods of reliability based on serviceability limited state for concrete structural members

Design of foundation structures of sea-crossing bridges on serviceability limit state

Reliability assessment and life prediction for serviceability of concrete bridges

Improved bridge capacity rating methods based on system reliability assessment

Crack Width Calculation Methods Of Reinforced Concrete Beidges And Application

The Model for Predicting the Remaining Service Life of Reinforced Concrete Bridges In-Service and Applicability

Method for evaluating durability of existing concrete bridges structures

Crack Width Calculation Methods of Reinforced Concrete Bridges and Application of Box Girder Bridge

Monitoring-Based Fatigue Reliability Assessment of Steel Bridges: Analytical Model and Application

Bridge Rating Using System Reliability Assessment. I: Assessment and Verification by Load Testing

Bridge Rating Using System Reliability Assessment. II: Improvements to Bridge Rating Practices