Abstract:The efficiency of perovskite solar cells is affected by open-circuit voltage losses due to radiative and non-radiative charge recombination. When estimated using sensitive photocurrent measurements that cover the above- and sub-bandgap regions, the radiative open-circuit voltage is often unphysically low. Here we report sensitive photocurrent and electroluminescence spectroscopy to probe radiative recombination at sub-bandgap defects in wide-bandgap mixed-halide lead perovskite solar cells. The radiative ideality factor associated with the optical transitions increases from 1, above and near the bandgap edge, to ~2 at mid-bandgap. Such photon energy-dependent ideality factor corresponds to a many-diode model. The radiative open-circuit voltage limit derived from this many-diode model enables differentiating between radiative and non-radiative voltage losses. The latter are deconvoluted into contributions from the bulk and interfaces via determining the quasi-Fermi level splitting. The experiments show that while sub-bandgap defects do not contribute to radiative voltage loss, they do affect non-radiative voltage losses.

What problem does this paper attempt to address?

This paper aims to solve the problem of open - circuit voltage loss in perovskite solar cells due to radiative and non - radiative recombination. Specifically, the authors focused on the impact of sub - bandgap defects on these losses. By using highly sensitive photocurrent measurement and electroluminescence spectroscopy techniques, the researchers were able to detect the radiative recombination of sub - bandgap defects in wide - bandgap mixed - halide lead perovskite solar cells. The main objective was to distinguish between radiative and non - radiative voltage losses and to analyze the non - radiative loss contributions at the bulk and interface by determining the quasi - Fermi level splitting. ### Research Background and Problem Perovskite solar cells have attracted much attention in multi - junction applications due to their high efficiency. In particular, wide - bandgap mixed - halide perovskite materials can achieve a relatively high open - circuit voltage ($V_{OC}$), which is crucial for improving the overall efficiency of multi - junction devices. However, the performance of such devices is currently affected by $V_{OC}$ defects, which are usually attributed to electronic defect states in perovskite materials, grain interfaces, or defects in selective charge - transport interfaces. ### Main Problems 1. **Distinction between Radiative and Non - radiative Voltage Losses**: How to distinguish the open - circuit voltage losses caused by radiative and non - radiative recombination in perovskite solar cells. 2. **Impact of Sub - bandgap Defects**: Whether sub - bandgap defects contribute to radiative voltage losses and how they affect non - radiative voltage losses. 3. **Determination of Quasi - Fermi Level Splitting**: Analyze the non - radiative loss contributions at the bulk and interface by determining the quasi - Fermi level splitting. ### Methods and Results - **High - sensitivity Photocurrent Measurement and Electroluminescence Spectroscopy**: Used to detect the radiative recombination of sub - bandgap defects. - **Multi - diode Model**: Extended the Shockley diode equation by introducing an energy - dependent radiative ideality factor to more accurately describe the impact of sub - bandgap defects. - **Quasi - Fermi Level Splitting Experiment**: Used to analyze the non - radiative loss contributions at the bulk and interface. ### Main Findings - **Sub - bandgap Defects Have No Significant Impact on Radiative Voltage Loss**: The study found that although sub - bandgap defects do not affect radiative voltage losses, they do affect non - radiative voltage losses. - **Validity of the Multi - diode Model**: Through the multi - diode model, the radiative open - circuit voltage ($V_{rad,OC}$) can be calculated more accurately and the non - radiative voltage losses can be quantified. - **Decomposition of Non - radiative Losses**: Through the quasi - Fermi level splitting experiment, the non - radiative loss contributions from the bulk and interface were successfully decomposed. ### Conclusion This study successfully solved the problem of the impact of sub - bandgap defects on the open - circuit voltage loss in perovskite solar cells by introducing the multi - diode model. The research results show that sub - bandgap defects mainly affect non - radiative voltage losses and have a relatively small impact on radiative voltage losses. This provides new ideas and methods for optimizing the performance of perovskite solar cells.

Effect of sub-bandgap defects on radiative and non-radiative open-circuit voltage losses in perovskite solar cells

High Open‐Circuit Voltages in Tin‐Rich Low‐Bandgap Perovskite‐Based Planar Heterojunction Photovoltaics

Quantifying Non‐Radiative Recombination in Passivated Wide‐Bandgap Metal Halide Perovskites Using Absolute Photoluminescence Spectroscopy

Loss Mechanism Analyses of Perovskite Solar Cells with Equivalent Circuit Model

Open-circuit and short-circuit loss management in wide-gap perovskite p-i-n solar cells

Mismatch of Quasi–Fermi Level Splitting and V oc in Perovskite Solar Cells

Defect/Interface Recombination Limited Quasi-Fermi Level Splitting and Open-Circuit Voltage in Mono- and Triple-Cation Perovskite Solar Cells.

Recombination Pathways in Perovskite Solar Cells

Looking beyond the Surface: The Band Gap of Bulk Methylammonium Lead Iodide

Quantifying the Energy Losses in CsPbI 2 Br Perovskite Solar Cells with an Open-Circuit Voltage of up to 1.45 V

On the origin of open-circuit voltage losses in flexible n-i-p perovskite solar cells

Quantifying Nonradiative Recombination and Resistive Losses in Perovskite Photovoltaics: A Modified Diode Model Approach

Rationalizing Performance Losses of Wide Bandgap Perovskite Solar Cells Evident in Data from the Perovskite Database

Insight into structure defects in high-performance perovskite solar cells

Improved evaluation of deep-level transient spectroscopy on perovskite solar cells reveals ionic defect distribution

Additive engineering for efficient wide-bandgap perovskite solar cells with low open-circuit voltage losses

Stable and low-photovoltage-loss perovskite solar cells by multifunctional passivation

Potassium tetrafluoroborate-induced defect tolerance enables efficient wide-bandgap perovskite solar cells

Mitigating deep-level defects through a self-healing process for highly efficient wide-bandgap inorganic CsPbI3-xBrx perovskite photovoltaics

Mapping of Internal Ionic/Electronic Transient Dynamics in Current–Voltage Operation of Perovskite Solar Cells