Abstract:Abstract Steam turbines are applied in production plants characterized by very large injections of steam. For this reason, the design and optimization of the admission are fundamentals to obtain an adequate level of turbine efficiency and ensure uniform flow at the inlet of the low pressure stages downstream the injection. In conjunction with a flexible operation and partial load conditions, it is important to estimate the losses appearing at those admissions sufficiently. The aerodynamic performance and flow field of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes were experimentally measured and numerically simulated in this paper. The total pressure loss, outlet flow angle and mass flow rate of the individual tangential admission volute at three different outlet Mach numbers and tangential admission volute coupled with the downstream vanes at four different inlet total pressures were measured. The flow field of the experimental tangential admission volute for the steam turbine was numerically investigated using threedimensional Reynolds-Averaged Navier-Stokes (RANS) and SST turbulence model. The numerical aerodynamic parameters of the tangential admission volute were in good agreement with the experimental data. The accuracy of the presented numerical method was validated. The flow field and aerodynamic parameters of tangential admission volute coupled with the downstream vanes were discussed under different inlet total pressure flow conditions. Then, three volute cases with different transverse distance were designed to investigate the influence of different outlet airflow angles on the aerodynamic performance of the downstream vanes. Results show that the outlet airflow angle of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes usually keep constants when the inlet total pressure is increases. The averaged outlet airflow angle of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes equal 152.0° and 166.6°, respectively. Comparing with the individual tangential admission volute, the outlet airflow angle of the tangential admission volute coupled with the downstream vanes is more uniform. The total pressure loss and mass flow rate of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes increase with the inlet total pressure. With the increase of the inlet total pressure, the total pressure loss coefficient of the individual tangential admission volute increases from 0.73% to 1.64%. In the same case, the total pressure loss of the tangential admission volute coupled with the downstream stator vane increases from 0.82% to 2.66%. The average airflow angle of the volute increases with the increase of the transverse distance. With the increase of the transverse distance, the total pressure loss coefficient of the volute increases and the total pressure loss coefficient of the vanes decreases. At the same time, the total pressure loss coefficient of the whole model decreases at first and then increases. The present work provides the reference for the design and performance analysis of the tangential admission volute for the steam turbines.

DESIGN, MULTI-POINT OPTIMIZATION AND ANALYSIS OF DIFFUSIVE STATOR VANES TO ENABLE TURBINE INTEGRATION INTO ROTATING DETONATION ENGINES

Optimization Design of a Turbine Blade to Reduce Secondary Flow Loss Using a Viscous Adjoint Method

Secondary Flow Reduction By Blade Redesign And Endwall Contouring Using An Adjoint Optimization Method

Shape Optimization of a Diffusive High-Pressure Turbine Vane Using Machine Learning Tools

Investigation of a Novel Turbine Housing to Produce a Non-Uniform Spanwise Flow Field at the Inlet to a Mixed Flow Turbine and Provide Variable Geometry Capabilities

Numerical Optimization of the Inlet Velocity Profile Ingested by the Conical Draft Tube of a Hydraulic Turbine

A Novel Design Towards Reducing Leakage Loss for Variable Geometry Turbines

Experimental Measurements and Numerical Investigations on the Aerodynamic Performance and Internal Flow Fields of Tangential Admission Volutes for Steam Turbines

Design and Flow Mechanism Analysis of Radial Turbine with Twin-entry Volute

Improving Vibration Response of Radial Turbine in Variable Geometry Turbochargers With CFD Analysis

Numerical and Experimental Investigation of Pulsating Flow Effect on A Nozzled and Nozzleless Mixed Flow Turbine for an Automotive Turbocharger

Mitigation of the Pressure Pulsations in an Axial Turbine At Speed-no-load with Independent Guide Vanes Opening

Numerical and Experimental Investigation of the Impact of Mixed Flow Turbine Inlet Cone Angle and Inlet Blade Angle

Fluid dynamic analysis and design strategies for a deswirler device for the direct measurement of radial turbine isentropic efficiency in experimental test rig

Numerical study on the integration of supersonic turbine guide vanes and three-dimensional hydrogen/air rotating detonation combustor

A Dimension Reduction-Based Multidisciplinary Design Optimization Method for High Pressure Turbine Blades

Unsteady Behaviours of a Volute in Turbocharger Turbine under Pulsating Conditions

On the Challenges of Integrating a Rotating Detonation Combustor With an Industrial Gas Turbine and Important Design Considerations for Row-1 Blades

Numerical investigation of the unsteady flow and wave dynamics in a wave rotor combustor

Design and Analysis of a Novel Split Sliding Variable Nozzle for Turbocharger Turbine

One-Dimensional and Three-Dimensional Design Strategies for Pressure Slope Optimization of High-Flow Transonic Centrifugal Compressor Impellers