Abstract:The interactions of tip leakage flow with mainstream and shock wave result in larger aerodynamic losses and blockage in high loading compressors and tend to be one of the triggers for flow instability. In order to attenuate the influence of leakage flow and improve the stall margin of highly loaded compressor, the new rotors surrounded by tip winglet are investigated by a numerical method. The tip winglet is designed by extending the flat blade tip section in outer 1.5% span of rotor blade. As the angle between the leakage flow and main flow decreases due to winglet, the losses and flow blockage have been weakened near stall condition, and the stall margin of new rotor with pressure-side winglet has an increase of over 10%. The migration and accumulation of low-energy fluids near the corner of casing endwall are affected significantly by tip winglet. As a result, the pressure-side winglet causes an increase of static pressure near the casing corner of pressure surface. Although the driving pressure difference near the leading edge of blade has increased slightly in the tip region, the strength and massflow rate of leakage flow appear to be decreased. As the leakage flow weakens in the new rotor with pressure-side winglet, its interaction with mainstream and shock has been suppressed obviously, and the delay of rotating stall occurs as well. Moreover, the flowfields of the new rotor with pressure-side winglet have been simulated at 40%, 60%, and 80% design speed. It is shown that the flow blockage and losses in the tip region have also reduced near stall point, and an improvement of overall performance is present in the new rotor with pressure-side winglet. All the changes of tip flow structure caused by winglet benefit to an increase of aerodynamic performance of new rotor at full rotational speed range.

Numerical investigation of the unsteady flow and wave dynamics in a wave rotor combustor

Large Eddy Simulations of Turbulent Combustion of Kerosene-Air in a Dual Swirl Gas Turbine Model Combustor at High Pressures

Computational Study of the Effect of Dual Air Swirling Injection on Turbulent Combustion of Kerosene–Air at a High Pressure

Analysis of Waves Dynamics in a Rotating Detonation Combustor Fueled by Kerosene

Experimental and Numerical Investigation of the Non-Reacting Flow in a High-Fidelity Heavy-Duty Gas Turbine DLN Combustor

Numerical Study of the Influence of Inlet Mass Flow Rate on Rotating Detonation Flow Field Characteristics and Pressure Gain Performance

The Behavior of the Propagating Velocity of Rotating Detonation Waves and Counter-Rotating Shock Waves in a Hollow Combustor

Numerical Research on Flow Characteristics of Inlet Flow-Path for Ram-Rotor

Flow-field Analysis and Pressure Gain Estimation of a Rotating Detonation Engine with Banded Distribution of Reactants

Numerical Investigation of Flow Properties of Rotating Detonation Engines

Analysis of flow-field characteristics and pressure gain in air-breathing rotating detonation combustor

Performance Analysis of Wave Rotor Combustor Integration into Baseline Engines: A Comparative Study of Pressure-Gain and Work Cycles

NUMERICAL INVESTIGATION OF UNSTEADY SHOCK WAVE MOTION IN A TRANSONIC CENTRIFUGAL COMPRESSOR

Numerical Investigation of the Unsteady Flow in a Transonic Compressor with Curved Rotors

Study on the Flow and Heat Transfer of Supercritical Pressure Hydrocarbon Fuel in a Rotating Channel

Investigation of Counter-Rotating Shock Wave Phenomenon and Instability Mechanisms of Rotating Detonation Engine with Hollow Combustor and Laval Nozzle

Influence of complex inlet conditions on the flow field and flow characteristics in compact combustor for gas turbine

Numerical Study of the Reverse-Rotating Waves in Rotating Detonation Engine with a Hollow Combustor

Numerical simulations and theoretical analysis of the forward shock wave in a non-premixed air-breathing rotating detonation combustor

Numerical Investigation of Blade Tip Winglet on Flow Structure in a High Loading Transonic Rotor

Hydrocarbon Fuel Flow and Heat Transfer Investigation in Rotating Channels