Abstract:Analysis of multiple equilibria of compounds with different coordination sites is extended to the description of adsorption isotherms with focus on the low relative pressure range. The entropy evolution is described using the particle distribution theory which also holds for adsorbents consisting of materials bearing more than one type of sites and applies for the condition that the adsorptive-adsorbent binding strength is larger than the adsorptive-adsorbate binding strength, so that monolayer coverage is favored. This allows to accurately determine the adsorption enthalpy. No assumption concerning the growth mechanism and specifics regarding the structure of the surface is needed. We find on a rigorous basis that this leads to Langmuir's equation for each site independently, that the total fractional amount of bound adsorptive can be described as a linear combination of individual Langmuir isotherms, and that such a linear combination has never the shape of the original Langmuir isotherms. The results are successfully applied to argon and nitrogen adsorption isotherms of nonporous, microporous, and mesoporous adsorbents which allows comparing systems for which the properties of the active surface span a large range. We observe that all experimental data can accurately be described by means of a linear combination of two Langmuir isotherms in the low relative pressure range up to a coverage of 60%–95%. This means that the shape of all adsorption isotherms is essentially determined by the entropy decrease with increasing coverage. The two site interactions involved exhibit substantially different adsorption enthalpies. Interestingly the Ar enthalpy of adsorption <math>ΔadsH1∅</math> of the sites 1 for the Stöber-type silica and of the three investigated MCM-41 adsorbents (with pore size of 2.7 nm, 4.1 nm, and 4.4 nm) are similar, namely −11 kJ/mol. The situation is analogous for the enthalpy of adsorption <math>ΔadsH2∅</math> for the sites 2, which amounts to −8 kJ/mol. A significantly larger enthalpy of adsorption <math>ΔadsH1∅</math> for the sites 1, namely −14.3 kJ/mol, and <math>ΔadsH2∅=−11.7 kJ/mol</math> for the sites 2 is measured for potassium zeolite L thus reflecting the more polar nature of this adsorbent. The measured specific surface area for these samples ranges from 14 m2/g for the Stöber-type silica up to 1100 m2/g for the MCM-41(4.1 nm) adsorbent. The information provided by the lc2-L (linear combination of 2 Langmuir functions) analysis allows calculating the evolution of the coverage of site 1 and of site 2 as a function of increasing pressure. The inflection points of the isotherms, which mark the point where the curvature changes sign, were determined by numerically evaluating the second derivatives which vanish at this point and are compared with values obtained using BET analysis.

Is the bet equation applicable to microporous adsorbents?

The bet method of analysis of gas adsorption data and its relevance to the calculation of surface areas

Evaluation of the BET Theory for the Characterization of Meso and Microporous MOFs

Adsorption of propylene and ethylene on 15 activated carbons

Experimental methods in chemical engineering: specific surface area and pore size distribution measurements—BET, BJH, and DFT

Unveiling the Non-Equilibrium Process in Multilayer Mixture Adsorption

Evaluation of the BET Method for Determining Surface Areas of MOFs and Zeolites that Contain Ultra-Micropores

A preliminary study on assessing the Brunauer-Emmett-Teller analysis for disordered carbonaceous materials

Simple isotherm equations to fit type I adsorption data

How Reproducible are Surface Areas Calculated from the BET Equation?

How Reproducible Are Surface Areas Calculated from the BET Equation? (adv. Mater. 27/2022)

The use of nitrogen adsorption for the characterisation of porous materials

Determining the Geometric Surface Area of Mesoporous Materials

The Relationship between CO2 Adsorption and Microporous Volume in a Porous Carbon Material

Entropy in multiple equilibria. Argon and nitrogen adsorption isotherms of nonporous, microporous, and mesoporous materials

Surface Area Determination of Porous Materials Using the Brunauer–Emmett–Teller (BET) Method: Limitations and Improvements

On the Applicability of the Langmuir Equation to Estimation of Adsorption Equilibrium Constants on a Powdered Solid from Aqueous Solution

Estimation of adsorption of ethane on the superactive microporous carbon adsorbent using the theory of volume filling of micropores

Determination of specific surface by the BET method

Nitrogen adsorption on silica surfaces of nonporous and mesoporous materials