Abstract:To investigate the effect of rotor design configuration on hemodynamic features, hemocompatibility and dynamic balance of blood pumps. Computational fluid dynamics was employed to investigate the effects of rotor type (closed impeller, semi-open impeller), clearance height and back vanes on blood pump performance. In particular, the Eulerian hemolysis model based on a power-law function and the Lagrangian thrombus model with integrated stress accumulation and residence time were applied to evaluate the hemocompatibility of the blood pump. This study shows that compared to the closed impeller, the semi-open impeller can improve hemolysis at a slight sacrifice in head pressure, but increase the risk of thrombogenic potential and disrupt rotor dynamic balance. For the semi-open impeller, the pressure head, hemolysis, and axial thrust of the blood pump decrease with increasing front clearance, and the risk of thrombosis increases first and then decreases with increasing front clearance. Variations in back clearance have little effect on pressure head, but larger on back clearance, worsens hemolysis, thrombogenic potential and rotor dynamic balance. The employment of back vanes has little effect on the pressure head. All back vanes configurations have an increased risk of hemolysis in the blood pump but are beneficial for the improvement of the rotor dynamic balance of the blood pump. Reasonable back vanes configuration (higher height, wider width, longer length and more number) decreases the flow separation, increases the velocity of blood in the back clearance, and reduces the risk of blood pooling and thrombosis. It was also found that hemolysis index (HI) was highly negatively correlated with pressure difference between the top and back clearances (r = -.87), and thrombogenic potential was positively correlated with pressure difference between the top and back clearances (r = .71). This study found that rotor type, clearance height, and back vanes significantly affect the hydraulic performance, hemocompatibility and rotor dynamic balance of centrifugal blood pumps through secondary flow. These parameters should be carefully selected when designing and optimizing centrifugal blood pumps for improving the blood pump clinical outcomes.

Optimization design of semi‐open impeller based on thrombogenicity in a blood pump

Optimizing the design of axial flow pump blades based on fluid characteristics

Influence of rotor impeller structure on performance improvement of suspended axial flow blood pumps

Design Improvement for Interventional Blood Pumps Based on Flow Analysis

Design optimization of an axial blood pump with computational fluid dynamics.

Design Optimization Of Flow Channel And Performance Analysis For A New-Type Centrifugal Blood Pump

The impact of rotor configurations on hemodynamic features, hemocompatibility and dynamic balance of the centrifugal blood pump: A numerical study

Impeller (straight Blade) Design Variations and Their Influence on the Performance of a Centrifugal Blood Pump.

A Novel Design of Spiral Groove Bearing in a Hydrodynamically Levitated Centrifugal Rotary Blood Pump.

Geometric Optimization of an Extracorporeal Centrifugal Blood Pump with an Unshrouded Impeller Concerning Both Hydraulic Performance and Shear Stress

Blood Pump Design Variations and Their Influence on Hydraulic Performance and Indicators of Hemocompatibility

[Numerical study of the effect of geometrical parameters of straight impellers on the flow and hemolysis performance of centrifugal blood pumps]

The design and evaluation of a disk type centrifugal blood pump

Analysis of fluid forces impacting on the impeller of a mixed flow blood pump with computational fluid dynamics

On the Optimization of a Centrifugal Maglev Blood Pump Through Design Variations

A novel integrated rotor of axial blood flow pump designed with computational fluid dynamics.

Structure optimization design of extracorporeal circulation blood transport pump

Impact of volute design features on hemodynamic performance and hemocompatibility of centrifugal blood pumps used in ECMO

A two-phase flow approach for modeling blood stasis and estimating the thrombosis potential of a ventricular assist device

Comprehensive study on simulation, performance evaluation and optimization strategies for blood pumps

Numerical Simulation and Experimental Research on Passive Hydrodynamic Bearing in a Blood Pump